File Manager

Hackfut Security File Manager

Current Path: /home/cp304470/mail/geotech-engineering.co.th/chalinee/cur

home / cp304470 / mail / geotech-engineering.co.th / chalinee / cur /

📁 ..
📄 1740028010.M110417P307228.cpanel15wh.bkk1.cloud.z.com,S=54299,W=55187:2,S(53.03 KB)
📄 1740047717.M281939P1143036.cpanel15wh.bkk1.cloud.z.com,S=7770,W=7912:2,S(7.59 KB)
📄 1740048146.M932752P1139732.cpanel15wh.bkk1.cloud.z.com,S=8235,W=8381:2,S(8.04 KB)
📄 1740067735.M8346P1918441.cpanel15wh.bkk1.cloud.z.com,S=1046655,W=1060447:2,S(1022.12 KB)
📄 1740966717.M709485P2494103.cpanel15wh.bkk1.cloud.z.com,S=1759,W=1804:2,S(1.72 KB)
📄 1741150085.M28903P2037030.cpanel15wh.bkk1.cloud.z.com,S=8462,W=8641:2,S(8.26 KB)
📄 1741151289.M938739P2207466.cpanel15wh.bkk1.cloud.z.com,S=9212,W=9401:2,S(9 KB)
📄 1741324737.M461832P2234124.cpanel15wh.bkk1.cloud.z.com,S=7143,W=7305:2,S(6.98 KB)
📄 1741324900.M951343P2234124.cpanel15wh.bkk1.cloud.z.com,S=7894,W=8066:2,S(7.71 KB)
📄 1741744799.M156166P3866168.cpanel15wh.bkk1.cloud.z.com,S=2573,W=2636:2,S(2.51 KB)
📄 1741745504.M164505P3906412.cpanel15wh.bkk1.cloud.z.com,S=10083,W=10283:2,S(9.85 KB)
📄 1741747037.M557902P3956752.cpanel15wh.bkk1.cloud.z.com,S=4873,W=5005:2,S(4.76 KB)
📄 1741830005.M129172P2517450.cpanel15wh.bkk1.cloud.z.com,S=16717,W=17016:2,S(16.33 KB)
📄 1742175971.M205943P1521630.cpanel15wh.bkk1.cloud.z.com,S=322028,W=326304:2,S(314.48 KB)
📄 1742178536.M828P1618186.cpanel15wh.bkk1.cloud.z.com,S=6428,W=6646:2,S(6.28 KB)
📄 1742179019.M658394P1635514.cpanel15wh.bkk1.cloud.z.com,S=4430842,W=4488520:2,S(4.23 MB)
📄 1742183844.M216356P1788981.cpanel15wh.bkk1.cloud.z.com,S=7689,W=7989:2,S(7.51 KB)
📄 1742192134.M227519P2055616.cpanel15wh.bkk1.cloud.z.com,S=2610,W=2676:2,S(2.55 KB)
📄 1742196914.M465880P2226517.cpanel15wh.bkk1.cloud.z.com,S=5509,W=5630:2,S(5.38 KB)
📄 1742202215.M701706P2404788.cpanel15wh.bkk1.cloud.z.com,S=1170170,W=1185439:2,S(1.12 MB)
📄 1742530091.M10173P1795303.cpanel15wh.bkk1.cloud.z.com,S=1204916,W=1220646:2,S(1.15 MB)
📄 1742541571.M693732P2209584.cpanel15wh.bkk1.cloud.z.com,S=4060,W=4173:2,S(3.96 KB)
📄 1742545768.M369865P2357733.cpanel15wh.bkk1.cloud.z.com,S=952912,W=965347:2,S(930.58 KB)
📄 1742549923.M80862P2475109.cpanel15wh.bkk1.cloud.z.com,S=2375,W=2444:2,S(2.32 KB)
📄 1743131508.M499881P2033171.cpanel15wh.bkk1.cloud.z.com,S=6660,W=6816:2,S(6.5 KB)
📄 1743131510.M95944P2033171.cpanel15wh.bkk1.cloud.z.com,S=7411,W=7577:2,S(7.24 KB)
📄 1743379224.M898002P479396.cpanel15wh.bkk1.cloud.z.com,S=6807,W=6965:2,S(6.65 KB)
📄 1743392540.M528124P1230599.cpanel15wh.bkk1.cloud.z.com,S=7558,W=7726:2,S(7.38 KB)
📄 1744774043.M943900P2168915.cpanel15wh.bkk1.cloud.z.com,S=10405,W=10576:2,S(10.16 KB)
📄 1744776574.M440096P2210475.cpanel15wh.bkk1.cloud.z.com,S=27987,W=28638:2,S(27.33 KB)
📄 1744776687.M154412P2210475.cpanel15wh.bkk1.cloud.z.com,S=13578,W=13918:2,S(13.26 KB)
📄 1745198405.M565273P198039.cpanel15wh.bkk1.cloud.z.com,S=6534,W=6687:2,S(6.38 KB)
📄 1745206335.M31801P602116.cpanel15wh.bkk1.cloud.z.com,S=7285,W=7448:2,S(7.11 KB)
📄 1745319099.M327300P3794876.cpanel15wh.bkk1.cloud.z.com,S=6536,W=6689:2,S(6.38 KB)
📄 1745377473.M88812P3373740.cpanel15wh.bkk1.cloud.z.com,S=7286,W=7449:2,S(7.12 KB)
📄 1745763610.M547437P1630756.cpanel15wh.bkk1.cloud.z.com,S=9632939,W=9758114:2,S(9.19 MB)
📄 1746432436.M87275P1653111.cpanel15wh.bkk1.cloud.z.com,S=7529,W=7696:2,S(7.35 KB)
📄 1746439478.M543323P2759412.cpanel15wh.bkk1.cloud.z.com,S=8277,W=8454:2,S(8.08 KB)
📄 1747712638.M41402P2596535.cpanel15wh.bkk1.cloud.z.com,S=5443,W=5575:2,S(5.32 KB)
📄 1747817647.M802001P1294228.cpanel15wh.bkk1.cloud.z.com,S=7295,W=7459:2,S(7.12 KB)
📄 1747818269.M95015P1427679.cpanel15wh.bkk1.cloud.z.com,S=8049,W=8224:2,S(7.86 KB)
📄 1747973600.M33542P3687856.cpanel15wh.bkk1.cloud.z.com,S=134256,W=136104:2,S(131.11 KB)
📄 1748011324.M680992P1173708.cpanel15wh.bkk1.cloud.z.com,S=625112,W=633826:2,S(610.46 KB)
📄 1748020067.M65465P1683747.cpanel15wh.bkk1.cloud.z.com,S=627826,W=636263:2,S(613.11 KB)
📄 1748239795.M551147P1832923.cpanel15wh.bkk1.cloud.z.com,S=7318,W=7449:2,S(7.15 KB)
📄 1748240260.M56094P1843945.cpanel15wh.bkk1.cloud.z.com,S=7604,W=7743:2,S(7.43 KB)
📄 1748425694.M389311P2248092.cpanel15wh.bkk1.cloud.z.com,S=706214,W=715652:2,S(689.66 KB)
📄 1748429220.M857110P3953830.cpanel15wh.bkk1.cloud.z.com,S=652955,W=662164:2,S(637.65 KB)
📄 1748488225.M887597P1419345.cpanel15wh.bkk1.cloud.z.com,S=7946,W=8087:2,S(7.76 KB)
📄 1748500971.M9830P1893581.cpanel15wh.bkk1.cloud.z.com,S=9268,W=9442:2,S(9.05 KB)
📄 1748503447.M265601P2950922.cpanel15wh.bkk1.cloud.z.com,S=32227,W=32863:2,S(31.47 KB)
📄 1748505319.M102335P3907969.cpanel15wh.bkk1.cloud.z.com,S=21923,W=22430:2,S(21.41 KB)
📄 1748505325.M405562P3907969.cpanel15wh.bkk1.cloud.z.com,S=23693,W=24248:2,S(23.14 KB)
📄 1748514879.M668493P3949529.cpanel15wh.bkk1.cloud.z.com,S=152083,W=154114:2,S(148.52 KB)
📄 1748525318.M471138P193732.cpanel15wh.bkk1.cloud.z.com,S=712738,W=722083:2,S(696.03 KB)
📄 1748534070.M906655P853493.cpanel15wh.bkk1.cloud.z.com,S=149347,W=151448:2,S(145.85 KB)
📄 1748835095.M980703P1886366.cpanel15wh.bkk1.cloud.z.com,S=31386,W=31950:2,S(30.65 KB)
📄 1749183804.M947973P2863393.cpanel15wh.bkk1.cloud.z.com,S=7933,W=8078:2,S(7.75 KB)
📄 1749536946.M508108P1469189.cpanel15wh.bkk1.cloud.z.com,S=15313,W=15544:2,S(14.95 KB)
📄 1749545836.M684765P4676.cpanel15wh.bkk1.cloud.z.com,S=152841,W=154975:2,S(149.26 KB)
📄 1749621381.M565178P480851.cpanel15wh.bkk1.cloud.z.com,S=32026,W=32589:2,S(31.28 KB)
📄 1750054199.M863739P1687547.cpanel15wh.bkk1.cloud.z.com,S=2055922,W=2082694:2,RS(1.96 MB)
📄 1750089309.M282926P2787053.cpanel15wh.bkk1.cloud.z.com,S=16663,W=17016:2,S(16.27 KB)
📄 1750089420.M166751P2787053.cpanel15wh.bkk1.cloud.z.com,S=25904,W=26343:2,S(25.3 KB)
📄 1750148168.M65570P1349433.cpanel15wh.bkk1.cloud.z.com,S=964006,W=977078:2,S(941.41 KB)
📄 1750237367.M767324P3099353.cpanel15wh.bkk1.cloud.z.com,S=5936927,W=6014117:2,S(5.66 MB)
📄 1750673431.M164145P3717233.cpanel15wh.bkk1.cloud.z.com,S=40024,W=40569:2,S(39.09 KB)
📄 1750824546.M645728P816304.cpanel15wh.bkk1.cloud.z.com,S=7686,W=7855:2,S(7.51 KB)
📄 1750824589.M438970P816304.cpanel15wh.bkk1.cloud.z.com,S=8435,W=8613:2,S(8.24 KB)
📄 1750824666.M511088P4160349.cpanel15wh.bkk1.cloud.z.com,S=7017,W=7177:2,S(6.85 KB)
📄 1750824693.M375017P4160349.cpanel15wh.bkk1.cloud.z.com,S=7016,W=7176:2,S(6.85 KB)
📄 1750825994.M408300P1663988.cpanel15wh.bkk1.cloud.z.com,S=6956,W=7115:2,S(6.79 KB)
📄 1750850832.M52200P3785408.cpanel15wh.bkk1.cloud.z.com,S=1487548,W=1525729:2,RS(1.42 MB)
📄 1750908416.M746980P2769805.cpanel15wh.bkk1.cloud.z.com,S=7105,W=7235:2,S(6.94 KB)
📄 1750932349.M718457P2224153.cpanel15wh.bkk1.cloud.z.com,S=1339339,W=1356769:2,S(1.28 MB)
📄 1750933647.M155005P3048965.cpanel15wh.bkk1.cloud.z.com,S=37540,W=38140:2,S(36.66 KB)
📄 1750935987.M100978P571929.cpanel15wh.bkk1.cloud.z.com,S=43207,W=43818:2,S(42.19 KB)
📄 1751010552.M972064P3415601.cpanel15wh.bkk1.cloud.z.com,S=17876,W=18172:2,S(17.46 KB)
📄 1751011044.M937281P3278914.cpanel15wh.bkk1.cloud.z.com,S=9646,W=9830:2,S(9.42 KB)
📄 1751039931.M612926P1420743.cpanel15wh.bkk1.cloud.z.com,S=338724,W=343182:2,S(330.79 KB)
📄 1751255415.M433200P3552729.cpanel15wh.bkk1.cloud.z.com,S=17252,W=17527:2,S(16.85 KB)
📄 1751295530.M747005P903691.cpanel15wh.bkk1.cloud.z.com,S=570428,W=577909:2,S(557.06 KB)
📄 1751295759.M543003P1031877.cpanel15wh.bkk1.cloud.z.com,S=42620,W=43224:2,S(41.62 KB)
📄 1751340353.M504863P298713.cpanel15wh.bkk1.cloud.z.com,S=424248,W=429840:2,RS(414.3 KB)
📄 1751341429.M927625P1075490.cpanel15wh.bkk1.cloud.z.com,S=325761,W=330362:2,S(318.13 KB)
📄 1751341461.M386713P1184083.cpanel15wh.bkk1.cloud.z.com,S=31518,W=32084:2,S(30.78 KB)
📄 1751441779.M124155P3389039.cpanel15wh.bkk1.cloud.z.com,S=8110,W=8284:2,S(7.92 KB)
📄 1751449513.M579656P189066.cpanel15wh.bkk1.cloud.z.com,S=8859,W=9043:2,S(8.65 KB)
📄 1751614511.M244083P4022020.cpanel15wh.bkk1.cloud.z.com,S=33251,W=33851:2,S(32.47 KB)
📄 1751876664.M303045P4137164.cpanel15wh.bkk1.cloud.z.com,S=79425,W=80511:2,S(77.56 KB)
📄 1751946252.M620883P1980714.cpanel15wh.bkk1.cloud.z.com,S=59893,W=61182:2,S(58.49 KB)
📄 1751956103.M941790P3880149.cpanel15wh.bkk1.cloud.z.com,S=105826,W=107254:2,S(103.35 KB)
📄 1751966890.M510210P2936537.cpanel15wh.bkk1.cloud.z.com,S=74868,W=76591:2,S(73.11 KB)
📄 1752121616.M207549P1004311.cpanel15wh.bkk1.cloud.z.com,S=13127,W=13409:2,S(12.82 KB)
📄 1752555205.M486392P3631780.cpanel15wh.bkk1.cloud.z.com,S=500300,W=512877:2,S(488.57 KB)
📄 1752560690.M502349P3554691.cpanel15wh.bkk1.cloud.z.com,S=8174,W=8349:2,S(7.98 KB)
📄 1752560960.M439323P3733834.cpanel15wh.bkk1.cloud.z.com,S=8972,W=9158:2,S(8.76 KB)
📄 1752570906.M163147P2689627.cpanel15wh.bkk1.cloud.z.com,S=6338,W=6449:2,S(6.19 KB)
📄 1753179145.M583307P1213203.cpanel15wh.bkk1.cloud.z.com,S=9369,W=9560:2,S(9.15 KB)
📄 1753187122.M842413P2615227.cpanel15wh.bkk1.cloud.z.com,S=10119,W=10320:2,S(9.88 KB)
📄 1753943845.M983132P3686760.cpanel15wh.bkk1.cloud.z.com,S=8150,W=8325:2,S(7.96 KB)
📄 1753945973.M600501P708871.cpanel15wh.bkk1.cloud.z.com,S=8901,W=9086:2,S(8.69 KB)
📄 1753946285.M156823P708871.cpanel15wh.bkk1.cloud.z.com,S=693099,W=702246:2,S(676.85 KB)
📄 1754012435.M194373P2465424.cpanel15wh.bkk1.cloud.z.com,S=16480159,W=16694220:2,S(15.72 MB)
📄 1754019077.M359425P3148000.cpanel15wh.bkk1.cloud.z.com,S=11120,W=11301:2,S(10.86 KB)
📄 1754030025.M863465P3215488.cpanel15wh.bkk1.cloud.z.com,S=3927,W=4022:2,S(3.83 KB)
📄 1754030026.M134278P3215488.cpanel15wh.bkk1.cloud.z.com,S=3398,W=3479:2,S(3.32 KB)
📄 1754385208.M53271P3223208.cpanel15wh.bkk1.cloud.z.com,S=104907,W=107390:2,S(102.45 KB)
📄 1754455584.M659973P2616323.cpanel15wh.bkk1.cloud.z.com,S=33480747,W=33915589:2,S(31.93 MB)
📄 1754458299.M129049P796015.cpanel15wh.bkk1.cloud.z.com,S=3316,W=3403:2,S(3.24 KB)
📄 1754546226.M806181P2472592.cpanel15wh.bkk1.cloud.z.com,S=7981,W=8153:2,S(7.79 KB)
📄 1754546357.M33696P2472592.cpanel15wh.bkk1.cloud.z.com,S=8732,W=8915:2,S(8.53 KB)
📄 1754645189.M360679P219440.cpanel15wh.bkk1.cloud.z.com,S=8699,W=8853:2,S(8.5 KB)
📄 1754645288.M65870P227204.cpanel15wh.bkk1.cloud.z.com,S=10315,W=10504:2,S(10.07 KB)
📄 1754645675.M345712P543068.cpanel15wh.bkk1.cloud.z.com,S=7824,W=7963:2,S(7.64 KB)
📄 1754648620.M396703P2711305.cpanel15wh.bkk1.cloud.z.com,S=7810,W=7980:2,S(7.63 KB)
📄 1754650247.M493400P3931891.cpanel15wh.bkk1.cloud.z.com,S=8561,W=8741:2,S(8.36 KB)
📄 1754663120.M294082P848408.cpanel15wh.bkk1.cloud.z.com,S=11974,W=12273:2,S(11.69 KB)
📄 1754814634.M693404P2726946.cpanel15wh.bkk1.cloud.z.com,S=8949,W=9135:2,S(8.74 KB)
📄 1754876174.M47830P3894959.cpanel15wh.bkk1.cloud.z.com,S=7990,W=8163:2,S(7.8 KB)
📄 1754877941.M71974P817648.cpanel15wh.bkk1.cloud.z.com,S=8780,W=8964:2,S(8.57 KB)
📄 1754878380.M807976P1058649.cpanel15wh.bkk1.cloud.z.com,S=13554,W=13850:2,S(13.24 KB)
📄 1754987190.M539213P675546.cpanel15wh.bkk1.cloud.z.com,S=51134,W=51849:2,S(49.94 KB)
📄 1755076013.M868602P3872512.cpanel15wh.bkk1.cloud.z.com,S=22211,W=22747:2,S(21.69 KB)
📄 1755139753.M961345P2916737.cpanel15wh.bkk1.cloud.z.com,S=22274,W=22738:2,S(21.75 KB)
📄 1755140794.M56622P3758317.cpanel15wh.bkk1.cloud.z.com,S=36138,W=36917:2,S(35.29 KB)
📄 1755150897.M450437P3305821.cpanel15wh.bkk1.cloud.z.com,S=199322,W=202102:2,S(194.65 KB)
📄 1755158349.M227254P1569131.cpanel15wh.bkk1.cloud.z.com,S=1202946,W=1218622:2,S(1.15 MB)
📄 1755174001.M954605P166867.cpanel15wh.bkk1.cloud.z.com,S=30211,W=30937:2,S(29.5 KB)
📄 1755245142.M724471P1789804.cpanel15wh.bkk1.cloud.z.com,S=28058,W=28633:2,S(27.4 KB)
📄 1755245330.M251006P1857441.cpanel15wh.bkk1.cloud.z.com,S=66434,W=67794:2,S(64.88 KB)
📄 1755498413.M548852P1648134.cpanel15wh.bkk1.cloud.z.com,S=319281,W=323466:2,S(311.8 KB)
📄 1755573875.M46005P2537808.cpanel15wh.bkk1.cloud.z.com,S=52237,W=52941:2,S(51.01 KB)
📄 1755590927.M245414P481967.cpanel15wh.bkk1.cloud.z.com,S=4591,W=4691:2,S(4.48 KB)
📄 1755827605.M614613P639268.cpanel15wh.bkk1.cloud.z.com,S=42296,W=43680:2,S(41.3 KB)
📄 1756095441.M179336P68248.cpanel15wh.bkk1.cloud.z.com,S=3344291,W=3387853:2,S(3.19 MB)
📄 1756199610.M59313P1386878.cpanel15wh.bkk1.cloud.z.com,S=9532,W=9698:2,S(9.31 KB)
📄 1756221853.M341049P2867945.cpanel15wh.bkk1.cloud.z.com,S=87315,W=88690:2,S(85.27 KB)
📄 1756269954.M635950P2531652.cpanel15wh.bkk1.cloud.z.com,S=4777,W=4888:2,S(4.67 KB)
📄 1756280644.M806802P1722694.cpanel15wh.bkk1.cloud.z.com,S=46842,W=47554:2,S(45.74 KB)
📄 1756288625.M849313P1828213.cpanel15wh.bkk1.cloud.z.com,S=19703,W=20185:2,S(19.24 KB)
📄 1756292738.M368048P4120907.cpanel15wh.bkk1.cloud.z.com,S=22801,W=23428:2,S(22.27 KB)
📄 1756347774.M750038P4054527.cpanel15wh.bkk1.cloud.z.com,S=7849,W=7993:2,S(7.67 KB)
📄 1756351392.M990109P1159444.cpanel15wh.bkk1.cloud.z.com,S=25479,W=26125:2,S(24.88 KB)
📄 1756366888.M635807P3643074.cpanel15wh.bkk1.cloud.z.com,S=74750,W=76586:2,S(73 KB)
📄 1756375406.M460926P3496059.cpanel15wh.bkk1.cloud.z.com,S=99590,W=101310:2,S(97.26 KB)
📄 1756692277.M311657P3357496.cpanel15wh.bkk1.cloud.z.com,S=119596,W=121411:2,RS(116.79 KB)
📄 1756696028.M514067P759018.cpanel15wh.bkk1.cloud.z.com,S=104002,W=105422:2,S(101.56 KB)
📄 1756697179.M355436P1213052.cpanel15wh.bkk1.cloud.z.com,S=74755,W=76591:2,S(73 KB)
📄 1756782066.M601107P36606.cpanel15wh.bkk1.cloud.z.com,S=49418,W=50085:2,Sa(48.26 KB)
📄 1756782120.M996672P36606.cpanel15wh.bkk1.cloud.z.com,S=74753,W=76589:2,S(73 KB)
📄 1756862066.M160985P621092.cpanel15wh.bkk1.cloud.z.com,S=74753,W=76589:2,S(73 KB)
📄 1756976914.M582183P3898804.cpanel15wh.bkk1.cloud.z.com,S=35111,W=35968:2,S(34.29 KB)
📄 1756981092.M244354P1833046.cpanel15wh.bkk1.cloud.z.com,S=11192,W=11390:2,S(10.93 KB)
📄 1757034299.M946158P2869989.cpanel15wh.bkk1.cloud.z.com,S=33706,W=34395:2,S(32.92 KB)
📄 1757669378.M515998P2038327.cpanel15wh.bkk1.cloud.z.com,S=51488,W=52180:2,S(50.28 KB)
📄 1758267979.M798151P1593578.cpanel15wh.bkk1.cloud.z.com,S=207677,W=210549:2,S(202.81 KB)
📄 1759911540.M471894P12184.cpanel15wh.bkk1.cloud.z.com,S=310677,W=314992:2,S(303.4 KB)
📄 1759983461.M552013P2781255.cpanel15wh.bkk1.cloud.z.com,S=5937497,W=6014750:2,S(5.66 MB)
📄 1760169762.M352685P2037420.cpanel15wh.bkk1.cloud.z.com,S=1172414,W=1187732:2,S(1.12 MB)
📄 1760423569.M122191P2676984.cpanel15wh.bkk1.cloud.z.com,S=48416,W=49070:2,S(47.28 KB)
📄 1760690002.M740801P2146534.cpanel15wh.bkk1.cloud.z.com,S=14396101,W=14583446:2,S(13.73 MB)
📄 1761289442.M69666P3821251.cpanel15wh.bkk1.cloud.z.com,S=12373,W=12660:2,S(12.08 KB)
📄 1761313491.M908809P2225792.cpanel15wh.bkk1.cloud.z.com,S=17287,W=17710:2,S(16.88 KB)
📄 1761528741.M175410P2223759.cpanel15wh.bkk1.cloud.z.com,S=22043,W=22579:2,S(21.53 KB)
📄 1761735238.M812355P1557548.cpanel15wh.bkk1.cloud.z.com,S=316939,W=321464:2,RS(309.51 KB)
📄 1761757674.M775090P3389210.cpanel15wh.bkk1.cloud.z.com,S=30384,W=31074:2,S(29.67 KB)
📄 1761836194.M901870P1935150.cpanel15wh.bkk1.cloud.z.com,S=46614,W=47743:2,RS(45.52 KB)
📄 1761897331.M323009P3798120.cpanel15wh.bkk1.cloud.z.com,S=24018,W=24404:2,Sa(23.46 KB)
📄 1761897351.M307685P3798120.cpanel15wh.bkk1.cloud.z.com,S=55413,W=56759:2,S(54.11 KB)
📄 1762143377.M266223P380103.cpanel15wh.bkk1.cloud.z.com,S=9197,W=9397:2,Sa(8.98 KB)
📄 1762143654.M39315P380103.cpanel15wh.bkk1.cloud.z.com,S=14567,W=14784:2,S(14.23 KB)
📄 1762144268.M407514P631858.cpanel15wh.bkk1.cloud.z.com,S=11907,W=12088:2,S(11.63 KB)
📄 1762144631.M185925P631858.cpanel15wh.bkk1.cloud.z.com,S=11911,W=12092:2,S(11.63 KB)
📄 1762241025.M585777P2715425.cpanel15wh.bkk1.cloud.z.com,S=48725,W=49382:2,S(47.58 KB)
📄 1762332267.M627347P597549.cpanel15wh.bkk1.cloud.z.com,S=132031,W=134429:2,RS(128.94 KB)
📄 1762417956.M890551P644016.cpanel15wh.bkk1.cloud.z.com,S=140991,W=143598:2,RS(137.69 KB)
📄 1762502779.M905044P1775268.cpanel15wh.bkk1.cloud.z.com,S=76624,W=78476:2,RS(74.83 KB)
📄 1763367392.M748941P3231375.cpanel15wh.bkk1.cloud.z.com,S=51873,W=52571:2,S(50.66 KB)
📄 1763370871.M186205P414673.cpanel15wh.bkk1.cloud.z.com,S=24960,W=25359:2,S(24.38 KB)
📄 1763370909.M653432P414673.cpanel15wh.bkk1.cloud.z.com,S=88791,W=90914:2,S(86.71 KB)
📄 1763522619.M367128P4065099.cpanel15wh.bkk1.cloud.z.com,S=3343130,W=3386677:2,S(3.19 MB)
📄 1764650932.M300965P1647960.cpanel15wh.bkk1.cloud.z.com,S=97415,W=99475:2,(95.13 KB)

Editing: 1761836194.M901870P1935150.cpanel15wh.bkk1.cloud.z.com,S=46614,W=47743:2,RS

Envelope-to: chalinee@geotech-engineering.co.th
Delivery-date: Thu, 30 Oct 2025 21:56:34 +0700
Date: Thu, 30 Oct 2025 14:55:45 +0000 (GMT)
From: Geosense Sales <sales@geosense.com>
To: "sangsan@geotech-engineering.co.th" <sangsan@geotech-engineering.co.th>,
	"chalinee@geotech-engineering.co.th" <chalinee@geotech-engineering.co.th>
Cc: "monsuda@reco.co.th" <monsuda@reco.co.th>,
	"sangsan_geotech@hotmail.com" <sangsan_geotech@hotmail.com>,
	"geotech@reco.co.th" <geotech@reco.co.th>
Message-ID: <Fz9n4000000000000000000000000000000000000000000000T4Y9GW00DYo6OUv_T8iYeR__rp1Xkg@sfdc.net>
In-Reply-To: <SE1P216MB1843F93FBEC6FD6D0EB735ADA0FBA@SE1P216MB1843.KORP216.PROD.OUTLOOK.COM>
References: <0a2ba8aa6ce12dd65070c1f10cb3c3c5@geotech-engineering.co.th>
 <qqDdS000000000000000000000000000000000000000000000T4N25E00z-blwqPuS9GGqjY0leDR2g@sfdc.net>
 <6b77805df0f125ee02c04eb928bffb10@geotech-engineering.co.th>
 <uxBzz000000000000000000000000000000000000000000000T4W3KI00_AmdyexoQti6a4YlfQsl_w@sfdc.net>
 <SE1P216MB1843F93FBEC6FD6D0EB735ADA0FBA@SE1P216MB1843.KORP216.PROD.OUTLOOK.COM>
Subject: =?ISO-8859-1?Q?Re:_Request_for_Quotation_=96_Geosense_IPI-X_(60_?=
 =?ISO-8859-1?Q?m_Depth)____[_ref:!00D240qbl2.!500Q40RH4fa:ref_]?=
MIME-Version: 1.0
Content-Type: multipart/alternative; 
	boundary="----=_Part_4800_2078043687.1761836145902"
X-mail_abuse_inquiries: http://www.salesforce.com/company/abuse.jsp
X-SFDC-TLS-NoRelay: 1
X-SFDC-CORRELATION-ID: 0001ioxw4ddlb5cr
X-SFDC-Binding: 1WrIRBV94myi25uB
X-SFDC-App: coreapp
X-SFDC-EmailCategory: emailPublisherEmail
X-SFDC-EntityId: 500Q400000RH4fa
X-SFDC-Interface: internal
X-Spam-Status: No, score=-0.2
X-Spam-Score: -1
X-Spam-Bar: /
X-Ham-Report: Spam detection software, running on the system "cpanel15wh.bkk1.cloud.z.com",
 has NOT identified this incoming email as spam. The original
 message has been attached to this so you can view it or label
 similar future email. If you have any questions, see
 root\@localhost for details.
 Content preview: Dear Chalinee, I hope all is well, Thank you for the additional
 information, I believe it would be good to schedule a quick call to discuss
 the configurations for this project. There are several considerations and
 options to consider. 
 Content analysis details: (-0.2 points, 5.0 required)
 pts rule name description
 ---- ---------------------- --------------------------------------------------
 0.0 RCVD_IN_VALIDITY_CERTIFIED_BLOCKED RBL: ADMINISTRATOR NOTICE:
 The query to Validity was blocked. See
 https://knowledge.validity.com/hc/en-us/articles/20961730681243
 for more information.
 [35.179.0.59 listed in sa-accredit.habeas.com]
 0.0 RCVD_IN_VALIDITY_RPBL_BLOCKED RBL: ADMINISTRATOR NOTICE: The
 query to Validity was blocked. See
 https://knowledge.validity.com/hc/en-us/articles/20961730681243
 for more information.
 [35.179.0.59 listed in bl.score.senderscore.com]
 -0.0 SPF_PASS SPF: sender matches SPF record
 -0.0 SPF_HELO_PASS SPF: HELO matches SPF record
 0.0 HTML_MESSAGE BODY: HTML included in message
 -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from
 envelope-from domain
 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily
 valid
 -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature
 -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from
 author's domain
X-Spam-Flag: NO

------=_Part_4800_2078043687.1761836145902
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Dear Chalinee,

I hope all is well,

Thank you for the additional information, I believe it would be good to sch=
edule a quick call to discuss the configurations for this project.
There are several considerations and options to consider.

I can make myself available for 8am UK Time tomorrow (3pm Thailand), If so =
please do send across a Teams invitation and we can discuss.
If not later tomorrow should be ok as well as anytime on Monday 3rd Novembe=
r.

Kind Regards

Lewis Naulls
Technical Sales Engineer

sales@geosense.com <mailto:sales@geosense.com>

support@geosense.com <mailto:support@geosense.com>

[Inline image URL : https://www.geosense.com/geosense-logo_225px/]

+44 (0)1359 270 457
+44 (0)7894 512 477

www.geosense.com <https://www.geosense.com>
=A0
The information in this email is intended only for the addressee(s) named a=
bove. Access to this email by anyone else is unauthorised. If you are not t=
he intended recipient of this message any disclosure, copying, distribution=
 or any action taken in reliance on it is prohibited and may be unlawful. G=
eosense Ltd does not warrant that any attachments are free from viruses or =
other defects and accept no liability for any losses resulting from infecte=
d email transmissions. Please note that any views expressed in this email m=
ay be those of the originator and not necessarily reflect those of this org=
anisation.

--------------- Original Message ---------------
From: chalinee@geotech-engineering.co.th [chalinee@geotech-engineering.co.t=
h]
Sent: 30/10/2025 06:26
To: sales@geosense.com; sangsan@geotech-engineering.co.th
Cc: monsuda@reco.co.th; sangsan_geotech@hotmail.com; geotech@reco.co.th
Subject: Re: Request for Quotation =96 Geosense IPI-X (60 m Depth) [ ]

Subject: Clarification on Quotation =96 E-GAT Lao PDR Project

Dear Lewis,

My name is Chalinee, an engineer from Mr. Sangsan=92s team.
Referring to the quotation you provided, I would like to seek a few clarifi=
cations to ensure our mutual understanding, as outlined below:

1. Additional information about the project
The E-GAT Lao PDR Project=A0requires the installation of a combined system=
=A0for measuring both ground movement=A0and ground settlement within the sa=
me borehole, at a depth of 60 meters, across two locations (2 holes).

At present, E-GAT Lao PDR has not yet finalized the gauge length of the sen=
sors.
Therefore, we kindly request you to provide quotation options=A0as follows:

Option 1.1=A0=96 Displacement sensors (IPI) installed at 1.5 m intervals, a=
nd settlement sensors (IPI-X) installed at 1.5 m intervals; borehole depth =
60 m, total 2 holes.
Option 1.2=A0=96 Displacement sensors (IPI) installed at 2 m intervals, and=
 settlement sensors (IPI-X) installed at 2 m intervals; borehole depth 60 m=
, total 2 holes.
Option 1.3=A0=96 Displacement sensors (IPI) installed at 3 m intervals, and=
 settlement sensors (IPI-X) installed at 3 m intervals; borehole depth 60 m=
, total 2 holes.

(Only one option=A0will be selected later, depending on the budget and fina=
l design.)

2. Clarification on quotation items
According to the quotation received, please kindly confirm the following:
To install one IPI-X Combined Inclinometer/Extensometer system=A0in a singl=
e borehole (60 m depth), it is necessary to order both Item =93IN-PLACE INC=
LINOMETER IPI-V-2-RR (IPI)=94=A0and Item =93IPI-X EXTENSION ROD (IPI-X)=94 =
together, in order to form a single integrated system=A0capable of measurin=
g both ground movement and ground settlement simultaneously within the same=
 borehole=A0=97 is that correct?

3. Inquiry on extension rod lengths
Could you please confirm whether the IPI-X Extension Rod=A0is available in =
more than one length option=A0(for example, 1 m, 1.5 m, 2 m, or 3 m)?

E-GAT Lao PDR prefers that the IPI=A0and IPI-X=A0sensors have equal gauge l=
engths, as shown below:

IPI 1.5 m and IPI-X 1.5 m
IPI 2 m and IPI-X 2 m
IPI 3 m and IPI-X 3 m

We have attached the client=92s reference document specifying these require=
ments for your consideration.

=A0

Best regards,
Chalinee
Engineer
Geotech & Engineering Service Co., Ltd.

=A0

From: Geosense Sales <sales@geosense.com>
Sent: 29 October 2025 5:53 PM
To: sangsan@geotech-engineering.co.th <sangsan@geotech-engineering.co.th>
Cc: monsuda@reco.co.th <monsuda@reco.co.th>; sangsan_geotech@hotmail.com <s=
angsan_geotech@hotmail.com>; chalinee@geotech-engineering.co.th <chalinee@g=
eotech-engineering.co.th>; geotech@reco.co.th <geotech@reco.co.th>
Subject: Re: Request for Quotation =96 Geosense IPI-X (60 m Depth) [ ]

=A0

Dear Sangsan,

I hope all is well,

Please find the attached proposal options for 1.5m, 2m & 3m IPI-X Sensors.
I have also included a separate proposal for the use of a WiSOS LORA system=
. This will bring huge economical savings to your offer.

I would also like to schedule a call next week to talk more in depth about =
this project and the considerations used within the proposals.
From how the specification requirement has been written for this Tender/pro=
ject, it tends to lean more towards a SISGEO product.
There are several considerations and changes we can implement to ensure you=
 are providing a more cost-effective, economical and superior offering goin=
g forward.

I believe there are huge savings to be made with a few simple yet smart con=
siderations.

Please do let me know when would be suitable to schedule a call to discuss =
further.

Kind Regards

Lewis Naulls
Technical Sales Engineer

sales@geosense.com <mailto:sales@geosense.com>

support@geosense.com <mailto:support@geosense.com>

[Inline image URL : https://www.geosense.com/geosense-logo_225px/]

+44 (0)1359 270 457
+44 (0)7894 512 477

--------------- Original Message ---------------
From: Sangsan S. [sangsan@geotech-engineering.co.th]
Sent: 27/10/2025 01:32
To: sales@geosense.com
Cc: monsuda@reco.co.th; sangsan_geotech@hotmail.com; chalinee@geotech-engin=
eering.co.th; geotech@reco.co.th
Subject: Re: Request for Quotation =96 Geosense IPI-X (60 m Depth) [ ]
=A0
Dear Lewis,

=A0

I hope you're doing well.

=A0

Thank you again for your support so far. I would like to clearly define the=
 scope so that you can prepare a budgetary quotation in the exact format ou=
r client needs for internal approval.

=A0

Project scope
We have two (2) monitoring locations.
Each location has one borehole of approximately 60 m depth.

=A0

For each borehole, we require a complete monitoring system consisting of:
=95 IPI-X for continuous lateral displacement monitoring along the borehole
=95 Magnetic extensometer for settlement / vertical displacement in the sam=
e borehole
=95 One Campbell Scientific CR1000Xe data logger (one logger per borehole),=
 delivered ready to use (programmed, wiring / connection diagram, and commu=
nications capability)

=A0

Quotation request
The client will select the final specification based on cost versus measure=
ment resolution. For that reason, we need pricing for three alternative des=
ign configurations. These are three full-instrumentation philosophies for t=
he entire ~60 m borehole, not three sensors at three depths.

=A0

Please provide a quotation for the following three options:

=A0

Option 1 =96 IPI-X using 1.5 m gauge length sections along the full ~60 m b=
orehole
Option 2 =96 IPI-X using 2.0 m gauge length sections along the full ~60 m b=
orehole
Option 3 =96 IPI-X using 3.0 m gauge length sections along the full ~60 m b=
orehole

=A0

For each option, please provide the total project cost covering both monito=
ring locations (i.e. both 60 m boreholes), and include the following items =
in that cost:

IPI-X chains for both boreholes
=95 Complete IPI-X assemblies to cover ~60 m depth per borehole, using only=
 the specified gauge length for that option (1.5 m / 2.0 m / 3.0 m)
=95 Bottom Anchor, Top Support, and all required fittings / fixings / acces=
sories
=95 All required ABS/inclinometer casing, couplers/connectors, and end caps=
 (please indicate the casing specification you recommend)

Magnetic extensometer systems for both boreholes
=95 Including targets / rings / anchors in positions you recommend
=95 Please provide the number and suggested placement of targets so that we=
 can correlate lateral movement (IPI-X) with vertical settlement in the sam=
e depth profile

Data acquisition
=95 Two (2) Campbell Scientific CR1000Xe data logger sets (one per borehole=
), delivered ready to deploy
=95 CRBasic program for IPI-X and magnetic extensometer inputs
=95 Wiring / connection diagram
=95 Communications options (Ethernet / Modbus / RS-485 / SDI-12 / optional =
4G, if available)

Commercial / delivery information
=95 Warranty terms (hardware, workmanship, calibration, etc.)
=95 Typical production / delivery lead time
=95 Delivery terms (EXW vs CIF Bangkok)

=A0

Why we are asking in this format
Our end client will review Option 1 vs Option 2 vs Option 3 as part of thei=
r budgeting and procurement decision. They must see a clear, project-level =
cost for each configuration (1.5 m / 2.0 m / 3.0 m) in order to select the =
final specification to purchase.

=A0

Once we receive these three project prices, we will finalize the BOQ and mo=
ve forward to contract.

=A0

If anything needs clarification, I=92m happy to arrange a short Teams call =
at your convenience.

=A0

Kind regards,

=A0

Sangsan Suebmee
Geotech & Engineering Service Limited

=A0

On 2025-10-24 20:44, Geosense Sales wrote:

Dear Sangsan,

I hope all is well, it's great to hear from you.

This sounds like an amazing project and I will provide you with as much sup=
port as required.

I have a few questions regarding the IPI-X requirement. Are there only 3x t=
argeted locations down the borehole for the IPI-X?
Will these 3x locations need to be 1.5m, 2m & 3m long sensors?

We can arrange a quick teams call next week to discuss further if this help=
s? When would you require a bid back by?

Any questions, please do let me know.

Kind Regards

Lewis Naulls
Technical Sales Engineer

sales@geosense.com <mailto:sales@geosense.com>

support@geosense.com <mailto:support@geosense.com>

[Inline image URL : https://www.geosense.com/geosense-logo_225px/]

+44 (0)1359 270 457
+44 (0)7894 512 477

--------------- Original Message ---------------
From: Sangsan S. [sangsan@geotech-engineering.co.th]
Sent: 24/10/2025 08:04
To: sales@geosense.com; monsuda@reco.co.th; sangsan_geotech@hotmail.com; ch=
alinee@geotech-engineering.co.th; geotech@reco.co.th
Subject: Request for Quotation =96 Geosense IPI-X (60 m Depth)
=A0
Dear Lewis,

I hope this message finds you well.

I am currently preparing a quotation package for our new client =97
E-GAT Lao PDR (Electricit=E9 du Lao =96 Generation Authority) =97 who plans=
 to install a
dam-safety instrumentation system next year.

The client requires a solution capable of measuring both inclinometer and e=
xtensometer displacements
at a 60 m installation depth, across two (2) monitoring locations.

To support their technical and budgetary evaluation, please kindly provide =
a quotation with the following details:

1. Geosense IPI-X (In-Place Inclinometer System) and Magnetic Extensometer

Please quote one (1) complete chain each for the following gauge-length con=
figurations:

Gauge Length =3D 1.5 m

Gauge Length =3D 2.0 m

Gauge Length =3D 3.0 m

Each configuration should be suitable for installation in a 60 m borehole,
including all necessary sensors, fittings, and installation accessories.

Please specify the total number of IPI-X sensors required for each gauge-le=
ngth configuration,
including the Bottom Anchor and Top Support units, as well as the number an=
d positions of magnetic targets
that correspond to the measuring intervals of each gauge-length design.

In addition, please include a quotation for the Magnetic Extensometer syste=
m
to be installed in the same 60 m borehole,
and indicate the recommended number of magnetic targets or settlement rings
corresponding to the IPI-X configuration you design.

We have no restriction on the final sensor count =97
please recommend the most appropriate arrangement and configuration
for accurate, reliable, and long-term monitoring performance.

2. ABS Casing and Accessories

Please include pricing for:

25 ABS pipes (for IPI installation)

25 ABS couplers/connectors

2 sets of Top and End caps

3. Datalogger System =96 Campbell Scientific CR1000Xe

Please include quotation for two (2) sets of Campbell Scientific CR1000Xe D=
ata Logger,
fully configured and coded for integration with the Geosense IPI-X and Exte=
nsometer systems.

Each set should include:

Full CRBasic coding and connection diagram (ready-to-use Plug & Play setup)

Communication support (Ethernet / Modbus / RS-485 / SDI-12 / optional 4G)

All necessary accessories and documentation

Please also specify delivery terms (EXW or CIF Bangkok), production lead ti=
me, and warranty details.

Many thanks for your continued support and collaboration.

In 2026, we plan to begin installing Geosense equipment in several dam-safe=
ty projects across Thailand,
marking an important milestone in our cooperation.
You can expect to receive additional RFQs from our team in the coming month=
s.
Kay will be in touch with you directly regarding those follow-up requests.

With kind regards,

Sangsan Suebmee
Business Development Manager
Geotech & Engineering Service Limited
? +66 2 059 0351
? sangsan@geotech-engineering.co.th
=A0

=A0

=A0ref:!00D240qbl2.!500Q40RH4fa:ref
------=_Part_4800_2078043687.1761836145902
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

<html><body>Dear Chalinee, 
 
I hope all is well, 
 
Thank you for the additional information, I believe it would be good to sch=
edule a quick call to discuss the configurations for this project. 
There are several considerations and options to consider. 
 
I can make myself available for 8am UK Time tomorrow (3pm Thailand), If so =
please do send across a Teams invitation and we can discuss. 
If not later tomorrow should be ok as well as anytime on Monday 3rd Novembe=
r. 
 
Kind Regards 
 
Lewis Naulls 
Technical Sales Engineer 
 
<a shape=3D"rect" href=3D"mailto:sales@geosense.com" target=3D"_blank">s=
ales@geosense.com</a> 
 
<a shape=3D"rect" href=3D"mailto:support@geosense.com" target=3D"_blank"><b=
>support@geosense.com</a> 
 
 
<img src=3D"https://www.geosense.com/geosense-logo_225px/"></img> 
 
+44 (0)1359 270 457 
+44 (0)7894 512 477 
 
<a shape=3D"rect" href=3D"https://www.geosense.com" target=3D"_blank">www.g=
eosense.com</a> 
=A0
The information in this email is int=
ended only for the addressee(s) named above. Access to this email by anyone=
 else is unauthorised. If you are not the intended recipient of this messag=
e any disclosure, copying, distribution or any action taken in reliance on =
it is prohibited and may be unlawful. Geosense Ltd does not warrant that an=
y attachments are free from viruses or other defects and accept no liabilit=
y for any losses resulting from infected email transmissions. Please note t=
hat any views expressed in this email may be those of the originator and no=
t necessarily reflect those of this organisation.
 
 
 
 
--------------- Original Message --------------- 
From: chalinee@geotech-engineering.co.th [chalinee@geotech-engineeri=
ng.co.th] 
Sent: 30/10/2025 06:26 
To: sales@geosense.com; sangsan@geotech-engineering.co.th 
Cc: monsuda@reco.co.th; sangsan_geotech@hotmail.com; geotech@reco.co=
.th 
Subject: Re: Request for Quotation =96 Geosense IPI-X (60 m Depth) [=
 ] 
 
<div class=3D"elementToProof" style=3D"line-height: normal; margin-top: 1em=
; margin-bottom: 1em; font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontS=
ervice, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0=
);">Subject: Clarification on Quotation =96 E-GAT Lao PDR Project</d=
iv>

<div class=3D"elementToProof" style=3D"line-height: normal; margin-top: 1em=
; margin-bottom: 1em; font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontS=
ervice, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0=
);">My name is Chalinee, an engineer from Mr. Sangsan=92s team</b=
>. 
Referring to the quotation you provided, I would like to seek a few clarifi=
cations to ensure our mutual understanding, as outlined below:</div>

<div class=3D"elementToProof" style=3D"line-height: normal; margin-top: 1em=
; margin-bottom: 1em; font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontS=
ervice, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0=
);">At present, E-GAT Lao PDR has not yet finalized the gauge length=
 of the sensors. 
Therefore, we kindly request you to provide quotation options=A0as f=
ollows:</div>

<ul><li style=3D"font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontServic=
e, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0); li=
ne-height: normal;">
Option 1.1=A0=96 Displacement sensors (IPI) installed at 1.5 m in=
tervals, and settlement sensors (IPI-X) installed at 1.5 m intervals=
; borehole depth 60 m, total 2 holes.</li><li style=3D"fo=
nt-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helveti=
ca, sans-serif; font-size: 12pt; color: rgb(0, 0, 0); line-height: normal;"=
>
Option 1.2=A0=96 Displacement sensors (IPI) installed at 2 m inte=
rvals, and settlement sensors (IPI-X) installed at 2 m intervals=
; borehole depth 60 m, total 2 holes.</li><li style=3D"font-f=
amily: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, =
sans-serif; font-size: 12pt; color: rgb(0, 0, 0); line-height: normal;">
Option 1.3=A0=96 Displacement sensors (IPI) installed at 3 m inte=
rvals, and settlement sensors (IPI-X) installed at 3 m intervals=
; borehole depth 60 m, total 2 holes.</li></ul>

<div class=3D"elementToProof" style=3D"line-height: normal; margin-top: 1em=
; margin-bottom: 1em; font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontS=
ervice, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0=
);">2. Clarification on quotation items 
According to the quotation received, please kindly confirm the following:<b=
r clear=3D"none">
To install one IPI-X Combined Inclinometer/Extensometer system=A0in =
a single borehole (60 m depth), it is necessary to order both Ite=
m =93IN-PLACE INCLINOMETER IPI-V-2-RR (IPI)=94=A0and Item =93IPI-X E=
XTENSION ROD (IPI-X)=94 together, in order to form a single integrat=
ed system=A0capable of measuring both ground movement and ground set=
tlement simultaneously within the same borehole=A0=97 is that correct?<=
/div>

<div class=3D"elementToProof" style=3D"line-height: normal; margin-top: 1em=
; margin-bottom: 1em; font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontS=
ervice, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0=
);">E-GAT Lao PDR prefers that the IPI=A0and IPI-X=A0sensors =
have equal gauge lengths, as shown below:</div>

<div class=3D"elementToProof" style=3D"line-height: normal; margin-top: 1em=
; margin-bottom: 1em; font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontS=
ervice, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0=
);">We have attached the client=92s reference document specifying these req=
uirements for your consideration.</div>

<hr style=3D"display:inline-block;width:98%" tabindex=3D"-1"></hr>
<div dir=3D"ltr" id=3D"divRplyFwdMsg">From: Geosense Sales &lt;sa=
les@geosense.com&gt; 
Sent: 29 October 2025 5:53 PM 
To: sangsan@geotech-engineering.co.th &lt;sangsan@geotech-engineerin=
g.co.th&gt; 
Cc: monsuda@reco.co.th &lt;monsuda@reco.co.th&gt;; sangsan_geotech@h=
otmail.com &lt;sangsan_geotech@hotmail.com&gt;; chalinee@geotech-engineerin=
g.co.th &lt;chalinee@geotech-engineering.co.th&gt;; geotech@reco.co.th &lt;=
geotech@reco.co.th&gt; 
Subject: Re: Request for Quotation =96 Geosense IPI-X (60 m Depth) [=
 ]

<div>Dear Sangsan, 
 
I hope all is well, 
 
Please find the attached proposal options for 1.5m, 2m &amp; 3m IPI-X Senso=
rs. 
I have also included a separate proposal for the use of a WiSOS LORA system=
. This will bring huge economical savings to your offer. 
 
I would also like to schedule a call next week to talk more in depth about =
this project and the considerations used within the proposals. 
From how the specification requirement has been written for this Tender/pro=
ject, it tends to lean more towards a SISGEO product. 
There are several considerations and changes we can implement to ensure you=
 are providing a more cost-effective, economical and superior offering goin=
g forward. 
 
I believe there are huge savings to be made with a few simple yet smart con=
siderations. 
 
Please do let me know when would be suitable to schedule a call to discuss =
further. 
 
Kind Regards 
 
Lewis Naulls 
Technical Sales Engineer 
 
<a shape=3D"rect" href=3D"mailto:sales@geosense.com" target=3D"_blank">s=
ales@geosense.com</a> 
 
<a shape=3D"rect" href=3D"mailto:support@geosense.com" target=3D"_blank"><b=
>support@geosense.com</a> 
 
 
<img src=3D"https://www.geosense.com/geosense-logo_225px/"></img> 
 
+44 (0)1359 270 457 
+44 (0)7894 512 477 
 
<a shape=3D"rect" href=3D"https://www.geosense.com" target=3D"_blank">www.g=
eosense.com</a> 
=A0
The information in this email is inten=
ded only for the addressee(s) named above. Access to this email by anyone e=
lse is unauthorised. If you are not the intended recipient of this message =
any disclosure, copying, distribution or any action taken in reliance on it=
 is prohibited and may be unlawful. Geosense Ltd does not warrant that any =
attachments are free from viruses or other defects and accept no liability =
for any losses resulting from infected email transmissions. Please note tha=
t any views expressed in this email may be those of the originator and not =
necessarily reflect those of this organisation.
 
 
 
 
--------------- Original Message --------------- 
From: Sangsan S. [sangsan@geotech-engineering.co.th] 
Sent: 27/10/2025 01:32 
To: sales@geosense.com 
Cc: monsuda@reco.co.th; sangsan_geotech@hotmail.com; chalinee@geotec=
h-engineering.co.th; geotech@reco.co.th 
Subject: Re: Request for Quotation =96 Geosense IPI-X (60 m Depth) [=
 ] 
=A0
Dear Lewis,

=A0

I hope you&#39;re doing well.

=A0

Thank you again for your support so far. I would like to clearly define =
the scope so that you can prepare a budgetary quotation in the exact format=
 our client needs for internal approval.

=A0

Project scope 
We have two (2) monitoring locations. 
Each location has one borehole of approximately 60 m depth.

=A0

For each borehole, we require a complete monitoring system consisting of=
: 
=95 IPI-X for continuous lateral displacement monitoring along the borehole=
 
=95 Magnetic extensometer for settlement / vertical displacement in the sam=
e borehole 
=95 One Campbell Scientific CR1000Xe data logger (one logger per borehole),=
 delivered ready to use (programmed, wiring / connection diagram, and commu=
nications capability)

=A0

Quotation request 
The client will select the final specification based on cost versus measure=
ment resolution. For that reason, we need pricing for three alternative des=
ign configurations. These are three full-instrumentation philosophies for t=
he entire ~60 m borehole, not three sensors at three depths.

=A0

Please provide a quotation for the following three options:

=A0

Option 1 =96 IPI-X using 1.5 m gauge length sections along the full ~60 =
m borehole 
Option 2 =96 IPI-X using 2.0 m gauge length sections along the full ~60 m b=
orehole 
Option 3 =96 IPI-X using 3.0 m gauge length sections along the full ~60 m b=
orehole

=A0

For each option, please provide the total project cost covering both mon=
itoring locations (i.e. both 60 m boreholes), and include the following ite=
ms in that cost:

<ol><li>
IPI-X chains for both boreholes 
=95 Complete IPI-X assemblies to cover ~60 m depth per borehole, using only=
 the specified gauge length for that option (1.5 m / 2.0 m / 3.0 m) 
=95 Bottom Anchor, Top Support, and all required fittings / fixings / acces=
sories 
=95 All required ABS/inclinometer casing, couplers/connectors, and end caps=
 (please indicate the casing specification you recommend)
</li><li>
Magnetic extensometer systems for both boreholes 
=95 Including targets / rings / anchors in positions you recommend 
=95 Please provide the number and suggested placement of targets so that we=
 can correlate lateral movement (IPI-X) with vertical settlement in the sam=
e depth profile
</li><li>
Data acquisition 
=95 Two (2) Campbell Scientific CR1000Xe data logger sets (one per borehole=
), delivered ready to deploy 
=95 CRBasic program for IPI-X and magnetic extensometer inputs 
=95 Wiring / connection diagram 
=95 Communications options (Ethernet / Modbus / RS-485 / SDI-12 / optional =
4G, if available)
</li><li>
Commercial / delivery information 
=95 Warranty terms (hardware, workmanship, calibration, etc.) 
=95 Typical production / delivery lead time 
=95 Delivery terms (EXW vs CIF Bangkok)
</li></ol>

=A0

Why we are asking in this format 
Our end client will review Option 1 vs Option 2 vs Option 3 as part of thei=
r budgeting and procurement decision. They must see a clear, project-level =
cost for each configuration (1.5 m / 2.0 m / 3.0 m) in order to select the =
final specification to purchase.

=A0

Once we receive these three project prices, we will finalize the BOQ and=
 move forward to contract.

=A0

If anything needs clarification, I=92m happy to arrange a short Teams ca=
ll at your convenience.

=A0

Kind regards,

=A0

Sangsan Suebmee 
Geotech &amp; Engineering Service Limited

=A0

On 2025-10-24 20:44, Geosense Sales wrote:

<blockquote style=3D"padding:0 0.4em; border-left:#1010ff 2px solid; margin=
:0">
<div id=3D"x_replybody1">Dear Sangsan, 
 
I hope all is well, it&#39;s great to hear from you. 
 
This sounds like an amazing project and I will provide you with as much sup=
port as required. 
 
I have a few questions regarding the IPI-X requirement. Are there only 3x t=
argeted locations down the borehole for the IPI-X? 
Will these 3x locations need to be 1.5m, 2m &amp; 3m long sensors? 
 
We can arrange a quick teams call next week to discuss further if this help=
s? When would you require a bid back by? 
 
Any questions, please do let me know. 
 
Kind Regards 
 
Lewis Naulls 
Technical Sales Engineer 
 
<a shape=3D"rect" href=3D"mailto:sales@geosense.com" rel=3D"noreferrer" tar=
get=3D"_blank">sales@geosense.com</a> 
 
<a shape=3D"rect" href=3D"mailto:support@geosense.com" rel=3D"noreferrer" t=
arget=3D"_blank">support@geosense.com</a> 
 
 
<img src=3D"https://www.geosense.com/geosense-logo_225px/"></img> 
 
+44 (0)1359 270 457 
+44 (0)7894 512 477 
 
<a shape=3D"rect" href=3D"https://www.geosense.com" rel=3D"noopener norefer=
rer" target=3D"_blank">www.geosense.com</a> 
=A0
The information in this email is inten=
ded only for the addressee(s) named above. Access to this email by anyone e=
lse is unauthorised. If you are not the intended recipient of this message =
any disclosure, copying, distribution or any action taken in reliance on it=
 is prohibited and may be unlawful. Geosense Ltd does not warrant that any =
attachments are free from viruses or other defects and accept no liability =
for any losses resulting from infected email transmissions. Please note tha=
t any views expressed in this email may be those of the originator and not =
necessarily reflect those of this organisation.
 
 
 
 
--------------- Original Message --------------- 
From: Sangsan S. [sangsan@geotech-engineering.co.th] 
Sent: 24/10/2025 08:04 
To: sales@geosense.com; monsuda@reco.co.th; sangsan_geotec=
h@hotmail.com; chalinee@geotech-engineering.co.th; geotech@reco.co.th 
Subject: Request for Quotation =96 Geosense IPI-X (60 m De=
pth) 
=A0
Dear Lewis,

I hope this message finds you well.

I am currently preparing a quotation package for our new client =97 
E-GAT Lao PDR (Electricit=E9 du Lao =96 Generation Authority)</stro=
ng> =97 who plans to install a 
dam-safety instrumentation system next year.

The client requires a solution capable of measuring both inclino=
meter and extensometer displacements 
at a 60 m installation depth, across two (2)</stro=
ng> monitoring locations.

To support their technical and budgetary evaluation, please kindly provi=
de a quotation with the following details:

<hr></hr>
<h3>1. Geosense IPI-X (In-Place Inclinometer System) and Magnetic E=
xtensometer</h3>

Please quote one (1) complete chain each for the follow=
ing gauge-length configurations:

<ul><li>
Gauge Length =3D 1.5 m
</li><li>
Gauge Length =3D 2.0 m
</li><li>
Gauge Length =3D 3.0 m
</li></ul>

Each configuration should be suitable for installation in a 60 m=
 borehole, 
including all necessary sensors, fittings, and installation accessories.</p=
>

Please specify the total number of IPI-X sensors requir=
ed for each gauge-length configuration, 
including the Bottom Anchor and Top Support units, as well=
 as the number and positions of magnetic targets 
that correspond to the measuring intervals of each gauge-length design.

In addition, please include a quotation for the Magnetic Extenso=
meter system 
to be installed in the same 60 m borehole, 
and indicate the recommended number of magnetic targets or settlement rings=
 
corresponding to the IPI-X configuration you design.

We have no restriction on the final sensor count =97 
please recommend the most appropriate arrangement and configuration 
for accurate, reliable, and long-term monitoring performance.

<hr></hr>
<h3>2. ABS Casing and Accessories</h3>

Please include pricing for:

<ul><li>
25 ABS pipes (for IPI installation)
</li><li>
25 ABS couplers/connectors
</li><li>
2 sets of Top and End caps
</li></ul>

<hr></hr>
<h3>3. Datalogger System =96 Campbell Scientific CR1000Xe<=
/h3>

Please include quotation for two (2) sets of Ca=
mpbell Scientific CR1000Xe Data Logger, 
fully configured and coded for integration with the Geosense IPI-X =
and Extensometer systems.

Each set should include:

<ul><li>
Full CRBasic coding and connection diagram (ready-to-use Plug &amp; Play=
 setup)
</li><li>
Communication support (Ethernet / Modbus / RS-485 / SDI-12 / optional 4G=
)
</li><li>
All necessary accessories and documentation
</li></ul>

Please also specify delivery terms (EXW or CIF Bangkok)=
, production lead time, and warranty details.

<hr></hr>
Many thanks for your continued support and collaboration.

In 2026, we plan to begin installing Geosense equipment in several dam-s=
afety projects across Thailand, 
marking an important milestone in our cooperation. 
You can expect to receive additional RFQs from our team in the coming month=
s. 
Kay will be in touch with you directly regarding those fol=
low-up requests.

With kind regards,

Sangsan Suebmee 
Business Development Manager 
Geotech &amp; Engineering Service Limited 
&#128222; +66 2 059 0351 
&#128231; <a shape=3D"rect" class=3D"x_v1decorated-link x_v1cursor-pointer"=
 rel=3D"noopener" target=3D"_blank"> sangsan@geotech-engineering.co.th</a><=
br clear=3D"none">
=A0
<img src=3D"https://geosense.my.salesforce.com/servlet/servlet.ImageServer?=
oid=3D00D24000000qbl2&amp;esid=3D018Q400000KotCK&amp;from=3Dint"></img> 
=A0</div>
</blockquote>
<img alt=3D"" src=3D"https://geosense.my.salesforce.com/servlet/servlet.Ima=
geServer?oid=3D00D24000000qbl2&amp;esid=3D018Q400000L0tDJ&amp;from=3Dint"><=
/img> 
=A0</div><img alt=3D"" src=3D"https://geosense.my.salesforce.com/servlet/se=
rvlet.ImageServer?oid=3D00D24000000qbl2&esid=3D018Q400000L5848&from=3Dext">=
 ref:!00D240qbl2.!500Q40RH4fa:ref</body></html>
------=_Part_4800_2078043687.1761836145902--

Hackfut Security File Manager

Editing: 1761836194.M901870P1935150.cpanel15wh.bkk1.cloud.z.com,S=46614,W=47743:2,RS

Upload File

Create Folder